knightmb's latest activity

It's true for "straight line" rolling resistance when you look at all 4 tires, but the fronts are the ones that will produce the most...

Looks good so far, but not enough miles to really say just yet about the lifetime health of the battery. The SOH is something that can...

I see this come up a lot here, but any year model 2020 and older are the only ones left where you can disable the sounds via LeafSpy...

Swap them (both) to the rear, inflate them 44 PSI cold (if less than the rated max) to help minimize rolling resistance, see if that...

A Gen 1 Leaf with +99% SOH and a failed batch of cells tells me the dealership has done a BMS reset and you can expect bars to drop over...

Don't feel bad, same problem in the USA. Some years back, a guy posted up on FB about his 40 kWh Leaf that he would run in the "red"...

More than likely, they didn't real the manual and most people are not honest about how they treat their vehicles. Not saying, they did...

Just my experience, my Leaf has over +90K miles (as does my wife's 2018 Leaf) and the only maintenance done has been tire replacements...

Nope, not at all. The warranty applies no matter what the dealership says. There are limits of course, like if the battery was dragging...

It can you show you everything, codes included (if any are stored) along with real-time information about the battery, power usage, etc...

My first guess is a failed cell somewhere. You are going to need LeafSpy to find that out. The dealerships are random, some are great...

Oh, then I can help with that using my own trailer experience. If the Leaf profile is high enough to streamline the air over the trailer...

That's because they missed the obvious connection of the QC station itself. Everyone thinks that if a QC station is advertised as 100 kW...

Experience trumps logic on this one. It is possible, I have proof. What you are getting incorrect is that it can't keep this level of...

I can give context, this is my Leaf. This picture was taken at a 500V ChaDeMo station. The first issue is the time estimates are wrong...