Recent content by lorenfb

Good Luck!

Yes, that's the conclusion!

For how long?

It's inherent in a spline shaft design, where the torque is constantly reversed.

The acid text is when someone reports on the Forum how extensive and useful the Autel 906 features are when connected to a Leaf.

Since LeafSpy was released, few if any Forum members have complained of its inadequacies until now. Yes, it's not at the level of the Nissan Consult, but for the value there's no comparison. I and many Forum members really couldn't care less!

Please provide a link. What are the "many quality choices". Thanks

In the over tens years owning a Leaf, I've never had a need to "reset the brake booster zero setting", nor have I had brake booster fault codes. Please provide a datasheet link for the Autel 909 with regard to the EV systems it's capable of accessing. Based on your previous post, it appears that...

Gret Great! Use it and write a review. I've been using LeafSpy since shortly after its release on both my '13 & '19 Leafs. Works great for my needs. I own numerous generic OBDII scanners, five of which are Autels - none for Leaf, for the many ICEVs I'm involved with. After using LeafSpy and its...

Please use the Autel on a Leaf and tell us what it does. Unless you have better info, the Autel website indicates no Leaf????

That's not true! You can always test the functionally of an ECU once you've re-flashed it, e.g. a mode change. By the way, Autel is a Chinese company.

Really? Are you guessing too? Have you used the Autel on a Leaf? Furthermore, It sounds like you don't fully understand the functionally of LeafSpy. Can the Autel properly re-flash Leaf ECUs to change their functionality like LeafSpy does?

Are you guessing, or do you actually have the Autel and used it? If so, then tell us what you have done with it on your Leaf.

Please define the Leaf diagnostic functions of Autel 906BT, e.g. read/reset fault codes, change ECUs' modes, etc.