Recent content by macgeeknz

No interest yet in the swap (other than mine). Pinouts for 2018 model year attached. I can't tell for certain if it's the same plug from @Daklein's photos but they both have 16 pins and look similar from the board side, so there's a good chance. If anyone has the newer model-year service manuals...

I suspect it's inside the unit itself because the pinouts of the plug in the service manual only show connections for an external speaker, power & CAN.

I have these, but I'm on the other side of the world and they're for a right-hand drive (no idea if they're reversible, but I've noticed whilst dismantling it that that many other parts in the vehicle are). Yours free if you pay the postage from the bottom of the world, but I truly shudder to...

Would you be interested in sending the VSP module half way around the world for me to examine and compare against a MY2018? I'd love to further investigate silencing the new model...

Almost finished now!

FWIW, it worked fine for me in Chrome on Ubuntu and in Chrome and Safari on macOS.

Ha :) Well to be honest Chad, I feel really guilty for sending you on that wild goose chase! It's completely my fault - my failing memory utterly let me down. My apologies for having wasted your time, I should double-check my data before posting. FWIW, that cluster does come out real easy -...

Oh blast, sorry Chad - I had forgotten it's moved up behind the combination meter in the ZE1. It's at location M47 in the picture below. To get there you need to remove the plastic facier around the combination meter (the instrument cluster) and then undo the 4 screws to lift the combination...

Bugger! Wonder if they have moved it?! Which model year do you have and is it left hand drive? Yeah that TCU is a telemetry unit (cell modem).

Great photo! Here's what I know (see text inside photo):

I love your eagerness and persistence! Alas that one is the ADAS module :) I've PM'd you a wiring harness diagram that might help you locate it (it's for an older older model year, but still ZE1).

Yep, that's the TPMS module.

Remove 8 torx screws from the glovebox facier (four at the top, four at the bottom). Pull the plastic panel above the footwell off (pull downwards), then pull the glovebox out towards the seat. Don't pull too hard because you'll need to stop and disconnect the lamp. Once the glovebox is out, the...

I was chatting with someone a few days ago who has had a towball fitted to their Leaf that apparently bolts through the boot floorplan! He was telling me how he didn't trust it and put much larger plates on either side to make it safer. Good luck with your install :)