Recent content by nikmaster

Possible, but the they have to be connected as 96 cells - two in parallel, and also is not sure that this will be able to do the balancing, since is calculated to one pack balancing only

I did some experiments. Looks like it can be used for monitoring of 8-96 cells. Is best to have number of cells dividable by 4. Still did not test the balancing. I bypassed the the second of the 48 cells and connected 48 only Still working with 47 cells Removed one more cell - left...

On the controller says: 70F3236 Here is the link to the PDF: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-IS26/DSA00511174.pdf" onclick="window.open(this.href);return false; Contact me - I can provide one for experiments.

I'm willing to rewire from the PC2 diode to PC4, so this way will cut the second 48 cells. Will test it with 48 cells only to see what will happen. There is also one EEPROM on the processor board - is almost impossible to contain the maximum number of the cells, but who knows. Need to test if...

Thanks. Works. The problems was the "BMS" option - I did not mention it. Will test it with the current sensor and pack of 16 cells to see how is doing. Also will test it in charging if that BMS will try to do balancing. Probably not, but for monitoring system still can be used. I will post the...

You did great job with this research, Turbo3 I've been trying also yesterday to connect the OBD/Bluetooth (same as yours) to the BMS, but without any batteries - it does not make any connection to the BMS. Powered all 3 lines - connected together to +12V. The processor has power and some CAN...