Search results

When I tried to use it on my car it gave me a 'CanBus' error, right on the dash display. I shut the car off, unplugged the scanner, and it booted right back up again normally. I'm not sure if you can actually damage a vehicle using these. The OBD port is actually fused on most vehicles, and I...

My car was modified to add DRL for Canada (came out of Cali). To accommodate that, they put a splitter into the fuse spot. All i did was unplug it, and put a fresh 10A fuse in the slot that is labelled for Rev Lights. Works like a champ, though I no longer have DRL until I fix it properly...

Here's the one I bought: https://www.amazon.ca/gp/product/B06WPBGKT9/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Works GREAT, but ONLY after I removed that one resistor as was suggested by folks.

I have yet to implement this, but in poking around in my car tonight diagnosing non-functional reverse lights (turns out the DRL add-on module somehow popped a fuse), I stumbled upon this little gem in one of the service manuals (BCS-8), regarding the combination switch / stalk in the car...

Alright. poking around in the dark, I have found that the car DOES have a DRL module installed (Truck-Lite 97300) in that weird upside down fuse panel on the front drivers fender. I found that whoever had installed the kit had put in this cute little fuse breakout device, that plugs into an...

I'm wondering that too. My car doesn't have daytime running lights. Or automatic taillights, or anything like that (it's as base as you can get). If I don't remember to turn my headlight switch on, the outside of my vehicle is pitch black at night. I've spent most of today calling around, and...

That only works for the instrument cluster temperature indicator above the steering wheel. Those of us who went cheap with their Leaf have a pretty basic air controller, and it doesn't appear to be tied into the rest of the vehicle in any way shape or form. :-)

I received a KW902 in the mail today (took about a month to arrive), got super excited, plugged it in, turned the car on, and got the scary looking T/M Error. Panicked, shut the car down, pulled the reader and turned the car back on and everything is A-OK. Took the reader to my 2001 Explorer and...

Have you figured it out? I don't have a garage, and the weather has been HORRENDOUS the past few days. Unfortunately diagnosing this is a two person job, lest my car take off without me in reverse. I want to try putting a hand on the relay while someone shifts into reverse to see if it clicks...

No, it's as basic as basic gets. I couldnt argue for what I paid for it, but if I knew then what I know now I might have picked a different car. :-) I haven't even had a chance to look at it since posting this. Ill put a meter on it probably tomorrow and see if its a power or ground issue. The...

Sorry, that's what I meant by swapping the bulbs. Replaced them with new ones and they still didn't work. Is that relay it for controls / protection? I suppose I could also look for a bad ground, but I would think everything in that lens would sharr a ground connection... And all the other...

Been lurking here since the spring, PM'd a couple people, but basically my first question. Both the reverse lights on my 2013 S are out. I figured it was just the bulbs, but I pulled the taillights off and the bulbs seem fine! Even tried swapping the bulbs JUST in case, but no dice! The entire...

I ALSO have this problem. However, I'm thinking at this point that it CAN'T be changed if no one has figured out how to do it. I've seen that same unit in other Nissan vehicles, so I wonder if there's a different part number, or a DIP switch somewhere on the unit, to change the units between...