tel7
Member
Hi Leaf enthusiasts,
I'm looking at buying a 2016 30kWh X Leaf, imported from Japan to NZ in about April 2018.
Here is the LeafSpy Pro report taken today;
https://imgur.com/a/MZo3QCu
(Is there a way to attach a file here? I couldn't see one, which is why I used a link.)
The 30kWh firmware fix has not yet been installed, but the salesman says doing so should take a SoH of 84.33% up to 93.26% (i.e. 84.33 x 0.43 + 57), all other things being equal.
I'm guessing that the 20mV is the difference between the minimum and maximum cell voltages, right?
Any comments/concerns on any of the figures in the report, or anything else, especially the AHr & Hx values, which I know little about the reasonable ranges of? And what's that blue bar in the graph about?
Thanks for your time and expertise.
I'm looking at buying a 2016 30kWh X Leaf, imported from Japan to NZ in about April 2018.
Here is the LeafSpy Pro report taken today;
https://imgur.com/a/MZo3QCu
(Is there a way to attach a file here? I couldn't see one, which is why I used a link.)
The 30kWh firmware fix has not yet been installed, but the salesman says doing so should take a SoH of 84.33% up to 93.26% (i.e. 84.33 x 0.43 + 57), all other things being equal.
I'm guessing that the 20mV is the difference between the minimum and maximum cell voltages, right?
Any comments/concerns on any of the figures in the report, or anything else, especially the AHr & Hx values, which I know little about the reasonable ranges of? And what's that blue bar in the graph about?
Thanks for your time and expertise.