goldbrick wrote:Personally, I would have 2 concerns. One is whether the 3 phase wiring is actually a wye connection or some other 3 phase system. The other is whether the loads would become unbalanced to the point where this would cause issues for any 3 phase equipment in use (eg a precision or high power motor). It's possible none of this is an issue for this installation but I would contact an electrician unless I was certain.
That's a good point. Consider using an AC voltmeter before connecting or better yet an o-scope, i.e. the peak voltage (not RMS) could
be a problem requiring use of an o-scope.
#1 Leaf SL MY 9/13: 74K miles, 48 Ahrs, 5.2 miles/kWh (average), Hx=70, SOH=78, L2 - 100% > 1000, temp < 95F (35C), min discharge (DOD) > 20 Ahrs
#2 Leaf SL MY 12/18: 115 Ahrs, 5.5 miles/kWh (average), Hx=98, SOH=99, DOD > 25%, temp < 105F