GlennD
Forum Supporter
Posts: 1116
Joined: Sun Dec 18, 2011 7:14 pm
Delivery Date: 20 Jul 2013
Leaf Number: 410357
Location: Anaheim

Re: OpenEVSE - Open Source Charging Station

Fri Jul 08, 2016 9:29 am

If you download the source from lincomatic's github archive the RAPI commands are in the RAPI file as comments.
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium
Traded for a Cirrus White 2014 Mercedes B (totaled)
2016 Urano Gray eGolf SEL w/ drive assist

stopeject
Posts: 8
Joined: Wed Sep 03, 2014 1:24 pm
Location: US

Re: OpenEVSE - Open Source Charging Station

Mon Jul 11, 2016 10:22 am

That was my question- is anything more user friendly going to happen?
BMW: 2015 i3, 2007 R1200GS

GlennD
Forum Supporter
Posts: 1116
Joined: Sun Dec 18, 2011 7:14 pm
Delivery Date: 20 Jul 2013
Leaf Number: 410357
Location: Anaheim

Re: OpenEVSE - Open Source Charging Station

Tue Oct 18, 2016 9:48 am

I was asked how the OpenEVSE timer works. OpenEVSE is totally open source and Goldserve added the timer and Lincomatic enhanced it.

This requires an !2C timer chip like the DS1307 or even better the DS3231N. Originally separate timer boards were used but Chris at OpenEVSE added them to the display boards. Currently he offers a color board with the better chip. On some of the units a have built I have used VFD and Monochrome units with timer chips.

The OpenEVSE opens up a charging window with adjustable start and stop times. The defaults of 5 min after midnight and 5 min before 7AM work for most people.

With the timer enabled the display says waiting until the start time. Then it turns into an ordinary EVSE and it starts charging the car assuming it is plugged in. Most cars charge fully in less than 4 hours so the car tells the EVSE to open its contactor and the display switches to connected. At the stop time the window closed and it is back to waiting.

If you need energy right now a short press of the button returns the EVSE to normal. The operating window will stay open until the stop time rolls around and then it returns to waiting.

The whole point of the timer is to allow charging late at night when the costs are low.

With the timer disabled the display says sleeping instead of waiting. The button function stays the same.
Last edited by GlennD on Tue Oct 18, 2016 10:58 am, edited 1 time in total.
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium
Traded for a Cirrus White 2014 Mercedes B (totaled)
2016 Urano Gray eGolf SEL w/ drive assist

evtifosi
Posts: 14
Joined: Sun Sep 27, 2015 8:15 pm
Delivery Date: 30 Sep 2015

Re: OpenEVSE - Open Source Charging Station

Tue Oct 18, 2016 10:25 am

I have had the 50A OpenEVSE for just about a year, and just started to use the on board timers to great effect.

For a few months I used the Leaf timers, but those became harder to work with when I needed to charge during the day for some reason. I eventually just turned the timers in the car off.

I started playing around with the current options to reduce the amount of charge I was getting, and then finally decided to just use the OpenEVSE timers. I have them set to start at 4:30am - and shut off at 6:55am. This will charge my 2015 SV from close to 20% to 100%, and if I am around 10% or lower it will typically charge it back to around 85%. It seems like a good setting for our limited use. I am on PG&E E-6 TOU rate plan and have Solar Panels...so this guarantees that we are charging off peak.

I got tired of remembering to go out to the garage after 9PM or plug it in when I woke up in the morning - so I love the timer function - just wish I had used it sooner!!!

edit: start time is 4:30 AM - so 27.5A for 1:25mins for most of our charging
Last edited by evtifosi on Thu Oct 20, 2016 10:21 am, edited 1 time in total.

GlennD
Forum Supporter
Posts: 1116
Joined: Sun Dec 18, 2011 7:14 pm
Delivery Date: 20 Jul 2013
Leaf Number: 410357
Location: Anaheim

Re: OpenEVSE - Open Source Charging Station

Tue Oct 18, 2016 10:45 am

evtifosi wrote:I have had the 50A OpenEVSE for just about a year, and just started to use the on board timers to great effect.

For a few months I used the Leaf timers, but those became harder to work with when I needed to charge during the day for some reason. I eventually just turned the timers in the car off.

I started playing around with the current options to reduce the amount of charge I was getting, and then finally decided to just use the OpenEVSE timers. I have them set to start at 4:05am - and shut off at 6:55am. This will charge my 2015 SV from close to 20% to 100%, and if I am around 10% or lower it will typically charge it back to around 85%. It seems like a good setting for our limited use. I am on PG&E E-6 TOU rate plan and have Solar Panels...so this guarantees that we are charging off peak.

I got tired of remembering to go out to the garage after 9PM or plug it in when I woke up in the morning - so I love the timer function - just wish I had used it sooner!!!


Yeah, the unfortunate thing about the Leaf timer is that the over-ride button charges to 100%. I charged both at work and at home at 80% so a timer on the EVSE was better for me. Now they removed the 80% option so it is not as important. As far as I can tell the eGolf also charges to 100%. The documentation on charging is lacking.
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium
Traded for a Cirrus White 2014 Mercedes B (totaled)
2016 Urano Gray eGolf SEL w/ drive assist

GlennD
Forum Supporter
Posts: 1116
Joined: Sun Dec 18, 2011 7:14 pm
Delivery Date: 20 Jul 2013
Leaf Number: 410357
Location: Anaheim

Re: OpenEVSE - Open Source Charging Station

Tue Oct 18, 2016 11:03 am

Since I am retired and I no longer have a commute playing around with the window will not work for me. I will just charge at around 60% to 100%. I do not like having under a half charge.

My Mercedes normally charged to 80%. If you pushed the range button it charged to 90%.
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium
Traded for a Cirrus White 2014 Mercedes B (totaled)
2016 Urano Gray eGolf SEL w/ drive assist

DfGriggs
Posts: 1
Joined: Wed Aug 24, 2016 7:33 pm
Delivery Date: 22 Aug 2016

Re: OpenEVSE - Open Source Charging Station

Thu Oct 20, 2016 6:51 am

Regarding:
So perhaps I should build the 50A kit for nominally the same cost and gain that extra 3.5A?


I think the reasoning for choosing the 50A kit may include:
1) Future-proofing to some extent.
2) For Leaf's, the marginally quicker charge, as described.
The marginal cost increment then provokes the decision.

Of course, one must have a 50A circuit available -- so some folks will buy the 50A kit, but keep it turned down to 24kW max.

GlennD
Forum Supporter
Posts: 1116
Joined: Sun Dec 18, 2011 7:14 pm
Delivery Date: 20 Jul 2013
Leaf Number: 410357
Location: Anaheim

Re: OpenEVSE - Open Source Charging Station

Thu Oct 20, 2016 8:44 am

A 50A EVSE is really a 40A EVSE (80% of 50 =40a) but unless you are planning on a Tesla derived car no other car draws over 30A. The cars's internal charger only takes what it needs and it ignores the rest.

If you have a Volt then your 50A EVSE will only supply 14A. An enhanced Leaf will draw 27.5A and ignore the rest. There is a great price delta going from a 30A EVSE and a 40A EVSE. Any car that needs 40A is also J1772 complyant and it will charge at 30A just 25% slower.

Basically the EVSE broadcasts the maximum current available and out of that the car takes what it needs and it ignores the rest. If the EVSE offers less than the car needs the car matches the current.

For example the maximum for a 30A circuit is 24A. A Leaf would set itself to 24A and it would be happy even though it could charge at 27.5A.
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium
Traded for a Cirrus White 2014 Mercedes B (totaled)
2016 Urano Gray eGolf SEL w/ drive assist

Return to “EVSE / Charging Equipment and Networks”