Has anyone found a way to see the posted images?
Creating an account at imageshack does not help!
s that are not extended through the tailgate harness. Four are in a square arrangement, and the 5th next to the square. The 4 in a square are Red and white (camera power), and black + Black (video signal). The black wire beside the square is the video trigger for the NAV to backup (ground it). If you get the video signal polarity backwards, it won't give a picture on the NAV. Tried it both ways, and used an old VCR for test video so as not to risk damage to the new camera.
This picture shows the black and black video signal wires I used in the body harness side behind the right rear quarter panel.
The red and white wires are right below it in the square arrangement. They are factory camera power, unused for my aftermarket DVR camera.
JohnGalt69 wrote:I just finished installing the factory backup camera in my 2013 SL. My car had 13 wires on the body side of the B18 connector (meaning it had the correct body harness for the camera), and it had the correct hatch harness (with the wiring and connector for the camera), so I just bought the following parts, installed them and the camera just worked. It took maybe 30 minutes to install.
906063NF1B - HANDLE ASSY-BAC
01454N5021 - SCREW (you need two)
284423NH2A - CAMERA ASSY-BAC
240513NF0B - Body to hatch harness
billjenll2 wrote:any reason i cant see the pictures?