jmeleaf
Posts: 8
Joined: Sat Mar 09, 2013 7:51 pm
Delivery Date: 01 Mar 2013

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Sat Jan 25, 2014 6:39 pm

HiTekLoLife, I was thinking of doing the same thing (running my own cables all the way from Driver to camera), let me know how you're doing :-)

Thanks,

Jean-Marc

gilbe027
Posts: 3
Joined: Tue Nov 26, 2013 7:12 pm
Delivery Date: 10 Oct 2013
Leaf Number: 413653

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Mon Feb 03, 2014 8:43 pm

I've run a wire that has four separate wires inside of it directly from the drivers kickpanel to the back hatch. I connected M21 pins 24 & 25 to camera Red & White, 8 & 9 to the camera Black and other color. I've grounded M21 pin 7. I DID replace the hatch harness so that the camera has a place to plug into. So, I've spliced my wire into the new hatch harness. (I purchased the second harness that goes between the hatch and the C-Pillar, but that just seemed like a huge project to run that baby through the side of the hatch...)

I have the screen turning blank with the guides - when I put it into reverse... But no video.

It's been -20 to 15 degrees max (Fahrenheit) in Minnesota lately, so it's finding heated garage space for me and that's not always easy. I'm way to dedicated to this project. Should really wait for summer...

Are we sure that 24 & 25 supply the power?
Any ideas why I may not be getting any luck with the video?

My next project is to test the theory there there is no power being supplied and to possibly bring an analog video source and see if that will show up on the screen. (but that sounds like a nice summer project...)

Any thoughts will be welcome.

Paul
------------------------------------------
2013 Sliver SV w/ LED + QC
Mods: OEM backup camera & QR Hitch

greengate
Gold Member
Posts: 524
Joined: Mon Feb 04, 2013 9:31 pm
Delivery Date: 04 Feb 2013
Location: Wilmette, IL

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Mon Feb 03, 2014 9:06 pm

I gave a copy of an earlier post regarding this to the service department of my dealer and asked if they were willing to do it for 1 1/2 labor as the previous OP's dealer did it for three hours.

They have been sitting on it because there is some ''rumor" that this may actually come out as a dealer installed option for the earlier cars without it.

Will have to see if anything hatches!
You do not have the required permissions to view the files attached to this post.

fotajoye
Posts: 237
Joined: Tue Aug 17, 2010 12:18 pm
Delivery Date: 01 Apr 2011
Leaf Number: 669
Location: Northern California

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Tue Apr 01, 2014 11:23 am

greengate wrote:I gave a copy of an earlier post regarding this to the service department of my dealer and asked if they were willing to do it for 1 1/2 labor as the previous OP's dealer did it for three hours.

They have been sitting on it because there is some ''rumor" that this may actually come out as a dealer installed option for the earlier cars without it.

Will have to see if anything hatches!


Don't want to be negative except I find that mods progress more rapid when set up as open source projects and involve multi-thinkers, i.e., the Leaf EVSE project which grew out of this forum:

https://code.google.com/p/open-evse/

There are many decisions involved with dealers and car makers; they must assess liability, policy, profit and risk, etc.
Only takes one 'NO' to sink an idea.

You might consider setting up an open source project; there is much discussion in the media about replacing rear view mirrors with cameras along with the side view mirrors as a future expansion. The project might become very popular.

4n7h0ny
Posts: 29
Joined: Tue Dec 17, 2013 4:52 pm
Delivery Date: 04 Dec 2013
Leaf Number: 418866
Location: Los Angeles

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Tue Jun 24, 2014 1:06 pm

Does anyone have experience doing this mod in a 2013 SV around the Los Angeles area? I am willing to pay for some help with the install, I already purchased all of the hardware. Please email me anthonynava (at) csu.fullerton.edu or you can reply here. Thanks!
- 2013 Nissan Leaf SV with quick charge and LED headlight package
- Backup camera install

fotajoye
Posts: 237
Joined: Tue Aug 17, 2010 12:18 pm
Delivery Date: 01 Apr 2011
Leaf Number: 669
Location: Northern California

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Tue Jun 24, 2014 2:31 pm

4n7h0ny wrote:Does anyone have experience doing this mod in a 2013 SV around the Los Angeles area? I am willing to pay for some help with the install, I already purchased all of the hardware. Please email me anthonynava (at) csu.fullerton.edu or you can reply here. Thanks!

Would you mind sharing the particulars about the hardware with us? What, where and how much?

4n7h0ny
Posts: 29
Joined: Tue Dec 17, 2013 4:52 pm
Delivery Date: 04 Dec 2013
Leaf Number: 418866
Location: Los Angeles

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Tue Jun 24, 2014 2:38 pm

fotajoye wrote:
4n7h0ny wrote:Does anyone have experience doing this mod in a 2013 SV around the Los Angeles area? I am willing to pay for some help with the install, I already purchased all of the hardware. Please email me anthonynava (at) csu.fullerton.edu or you can reply here. Thanks!

Would you mind sharing the particulars about the hardware with us? What, where and how much?


Sure, the hardware I purchased is the following from tascaparts.com:

24051-3NF0B
HARNESS BACK DR
$48.56

24052-3NF0C
HARNESS BACK DR
$20.22

28442-3NH0A
REAR CAMERA
$129.69

90606-3NF4B
HANDLE, OUTSIDE
$50.31

01454-N5021
SCREW
$1.34

I am will to pay a reasonable rate for the labor, just name your price.
- 2013 Nissan Leaf SV with quick charge and LED headlight package
- Backup camera install

fotajoye
Posts: 237
Joined: Tue Aug 17, 2010 12:18 pm
Delivery Date: 01 Apr 2011
Leaf Number: 669
Location: Northern California

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Tue Jun 24, 2014 3:10 pm

4n7h0ny wrote:
fotajoye wrote:
4n7h0ny wrote:Does anyone have experience doing this mod in a 2013 SV around the Los Angeles area? I am willing to pay for some help with the install, I already purchased all of the hardware. Please email me anthonynava (at) csu.fullerton.edu or you can reply here. Thanks!

Would you mind sharing the particulars about the hardware with us? What, where and how much?


Sure, the hardware I purchased is the following from tascaparts.com:

24051-3NF0B
HARNESS BACK DR
$48.56

24052-3NF0C
HARNESS BACK DR
$20.22

28442-3NH0A
REAR CAMERA
$129.69

90606-3NF4B
HANDLE, OUTSIDE
$50.31

01454-N5021
SCREW
$1.34

I am will to pay a reasonable rate for the labor, just name your price.


Thanks for the info
Try a PM to "greengate"; lf that doesn't work out, you may want to try hunting around in this thread for someone who is actively working on the idea and PM them.

chuckb
Posts: 20
Joined: Wed Sep 26, 2012 9:07 pm
Delivery Date: 26 Sep 2012
Leaf Number: 022108
Location: Gallatin, TN

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Thu Jun 26, 2014 1:17 pm

Ramius83 wrote:Second, I did successfully a rear view camera using all of the OEM equipment to an 2013 SL model that did not have any rear view camera or all around view. I used the parts list from that one post that someone did with the OEM part numbers. I did NOT need the actual rear hatch harness because that SL already had the 4 camera wires and connector at the hatch where the camera would plug in to. The very first time I put the car into reverse, it worked like a charm.



OK, so my dealer has put in the camera and hatch on my 2013 SL but can't make it work... was this just Plug and Play or did you have to do anything else?

Thanks,
Chuck

AZRVExpert
Posts: 3
Joined: Sun Jun 29, 2014 2:04 pm
Delivery Date: 01 Apr 2014
Leaf Number: 006334

Re: How To: Reverse Backup Camera for SV Model w/ OEM Telema

Sun Jun 29, 2014 2:16 pm

I just wanted to thank the OP and the other posters that gave out such useful information.

I have a 2011 Leaf with no backup camera but was hoping that this tutorial would work for me too. I can tell you that all the harnesses worked for me and the new handle and camera fit the 2011. My biggest problem was that there was absolutely no wiring from the rear quarter panel to the HU. In fact I should have gone to the plug at the radio first and noticed that there were no wires in pins 56-60 but I didn't and rather than be stuck wasting money and the time I already had into the install, I used the OP's method but with OEM parts.

Rather than buying pins though, I reused three wired pins from the old harness at the rear hatch and put them in the plug at the radio. Everything seems to be working though including the lines that move with steering.

Thanks again.

Return to “Accessories / Mods”