Kei
Posts: 1
Joined: Sat Oct 14, 2017 3:10 pm
Delivery Date: 14 Oct 2013

Re: How To: Backup camera for S model with OE parts

Sat Oct 14, 2017 3:16 pm

I did successfully install rear view camera without M21 wire.
from rear qt panel run 4 wires to AV.

hardest part was...
Red (+6V) -> Pin #39
Yellow (Video) -> Pin #40
White (Shield) -> Pin #60
Black(chassis ground) -> Pin#58 and ground both.

real challenge was pin rear AV unit. I drilled and make bigger hole and used 4 pins from old handle(wo camera). that looks fit on rear AV.
after cut 4 wire and pins from old handle lock wire put them into rear AV connecter. then solder 4 wires from camera to them.
it fits and works great!

Thanks all post here help me to figure out.(30min to hatch rear qt harness but took 4 hours search forum, wire to AV.)

Mr20024
Posts: 11
Joined: Wed Feb 21, 2018 12:10 pm
Delivery Date: 12 Feb 2018
Leaf Number: 403954

Re: How To: Backup camera for S model with OE parts

Sun Apr 22, 2018 4:47 pm

I just did it on my '13 SL (2/13 date) and just needed the body to hatch harness, camera, and new handle.

Return to “Accessories / Mods”