Parts007
Active member
Does any company offer window deflectors for the 16 Leaf? The ones you install so you can crack your windows open while it is raining. thanks.
WINDOW DEFLECTOR OR WINDOW VENTVISORS
- Thread starter Parts007
- Start date
Help Support My Nissan Leaf Forum:
ElectricEddy
Well-known member
There are a couple of links in this thread http://www.mynissanleaf.com/viewtopic.php?f=6&t=12015&start=10Parts007 said:
I personally didn't think the price was worth it , so I just wipe the seats off (leather; SL )
Parts007
Active member
Thank you. I did a search but obviously the wrong key words.
Parts007
Active member
I don't like the fact that this window deflector is only available from an UK or Japan vendor for lots of money... I don't understand why Nissan doesn't offer this in the USA..
chuhouse2003
Well-known member
Parts007
Active member
Thank you ucsfmu. I just ordered a set
Bob
Well-known member
When someone gets a set, please let us know how they work for you and how you like them.
Thanks!
Bob
Thanks!
Bob
Parts007
Active member
Bob said:
I have UPS tracking that says mine will land on Tues, July 12. I rush in and out from home to a second volunteer job on Tues night. So I will not be able to mess with them until Wed evening. I will give a full report including pics on my Instagram acct. (since I can't do pics here).
Tony
Parts007
Active member
The Wellvisors are installed. Overall I was happy with the quality and ease of installation. All double sided tape and no clips like some of the instructions show. The package referred me to the website for installation instructions. However all the instructions were for specific vehicles. There were no specific directions for the Leaf..
I will say that the front corner of the tape was peeled. Hopefully it will hold up, I will know after a test drive with rain tomorrow afternoon.
Pictures my Leaf Instagram account. Nissanleafguy.
https://www.instagram.com/p/BH0iQwgA1bD/
I will say that the front corner of the tape was peeled. Hopefully it will hold up, I will know after a test drive with rain tomorrow afternoon.
Pictures my Leaf Instagram account. Nissanleafguy.
https://www.instagram.com/p/BH0iQwgA1bD/
ElectricEddy
Well-known member
Just got mine too, waiting for the temps to hit 20C before installing them.( Beat the post office strike)Parts007 said:
I notice on the dry fit the middle seems drooped a bit (only the curved ones) , about 3/8 inch low where the trailing edges are perfect about 1/8 inch below frame , Were yours the same? Did you start with the strips at the front and work back and did you have to apply any pressure to "bend " the middle parts up.
All I got for a response from Wellvisors was to "start from the rear edge, while slowly peeling the tape,you have to "work" the edge of the visor to the door frame the visor will not break due to its flexible nature"
OK so if I do that will the pressure of bending it slightly loosen the adhesive and cause it not to stick or worse yet come off later? The 3M tape strip is only 1/4 inch wide.
Yours look pretty straight, just curious if you had the same problem.
dhanson865
Well-known member
Parts007 said:
Part Number 3-847NS013
Wellvisors SKU 183724
Is that a set of 4 pieces? So I only need to order 1 and pay the $45?
Parts007
Active member
Yes
Parts007
Active member
ElectricEddy said:
I left the middle as it sat. Drooped in the middle.. I don't think it makes a difference. I sits natural. I agree about the thin tape. But it sticks well after you clean it.
I started at the front edge. But I saw that droop and it lines up perfectly at the rear of the front door.
