MalcolmReynolds
Posts: 45
Joined: Sat Jun 10, 2017 10:39 am
Delivery Date: 04 Jul 2017

Window Vent Shades, Vent visor review

Tue Jul 04, 2017 3:56 pm

One of the things I have put on all my vehicles for years has been Auto Vent Shades, Ventvisors. These are molded pieces of plastic that typically you put in the window channel or over the window that will allow you to roll down your windows a decent amount and not be beat to death by the wind, rain etc, and it will help keep your windows from fogging up. I have been such a fan of these things that I always go and get some for my vehicles.

Well sadly the Leaf is a limited production car so AVS and Weathertech and others have not seen fit to make these for our car. Luckily I found a link on this forum for a company that makes something like it for a reasonable price. I saw there was something you could also order from Japan that was crazy expensive and I just couldn't validate the quaility. Well some people had stated these cheaper ones on Amazon worked well, but they questioned how long they would last. So I took a chance and ordered them.

I generally prefer the in-channel Venvisors due to the cleaner install look. That was not available this time. I wasn't sure how I was going to like the over the window install. I ordered these and they arrived. They are a thinner material than what I would normally get with an AVS product. They do seem to line up OK over the window and are reasonably close to being molded for our car. Installation was not difficult. You have adhesive tape strips on the back which you typically will peel a corner on the ends and fold it over so you can get to it when the visor is pressed into place and more or less "tacked" by the small exposed area you have peeled so you have a piece you can pull. Start by cleaning the area where the tape/visor is going to attach with some alcohol and a lint free cloth. Then line your pieces up where you want them to make sure you have them where you think they should be, then peel a portion of the tape back and then tack it in place and pull the exposed tabs you made accessible by folding over an edge.

Overall if you haven't done anything like this before it can be a little intimidating, but it isn't hard. Just prefit your pieces first to make sure you know where they are going to go before you peel away any of the cover off the adhesive. Then just work your way around the edges pressing down to make sure your adhesive is getting good contact.

I can't say I am a fan of the over the window visor, but it looks OK. It is a thinner material than you would get with other well known products in the market, but the fit seems OK. Overall it looks like these will work. They should function as well as the other products I have owned over the years and if they help keep the car cooler when parked, the rain out, and the windows fog free then they will be worth it. I have no reason to doubt that will be the case here.

By allowing you to keep your windows rolled down a little you can keep internal car temps down which may have an impact on not just the longevity of the interior but may actually be implicated in battery temps and degradation. I know that subject is controversial, but what isn't controversial is the fact that when the windows of all my vehicles are down a little bit the interior temps MUCH cooler. That is no joke and I think with the Leaf this may be even more crucial.

I know lots of people here battle fogging with the Leaf. With these visors you may finally have a tool that will give you the upper hand on fogging.

Overall I can recommend these visors. If I can find the link for them on Amazon I will post it here if we are allowed to do that.
=======================================
"Serenity" 2013 SL 12 bars 39k+ miles and counting
Zencar 32a EVSE

User avatar
paulgipe
Gold Member
Posts: 174
Joined: Sat Aug 02, 2014 4:23 pm
Delivery Date: 20 Oct 2014
Leaf Number: 311200
Location: Bakersfield, CA 93305
Contact: Website

Re: Window Vent Shades, Vent visor review

Tue Jul 04, 2017 5:06 pm

Malcolm your reviews are well done. Should be useful to newbies.
Bakersfield, California
2015 Nissan S with QC, Brilliant Silver, leased
2013 Chevy Volt Premium, bought used 10/3/16
L2; ClipperCreek HCS-40; EVSEUpgrade; Jesla

MalcolmReynolds
Posts: 45
Joined: Sat Jun 10, 2017 10:39 am
Delivery Date: 04 Jul 2017

Re: Window Vent Shades, Vent visor review

Tue Jul 04, 2017 9:39 pm

Thanks Paul. I was hoping by sharing the review and experience it will help new people coming to the Leaf or even some existing owners who are still not aware of ventvisors some more info about them.

I see a lot of veteran Leaf owners online that apparently don't know about ventvisors because I see a lot of posts about window fogging and this is a really good option to help in the battle of the fog. Some people I think avoid them because they don't like the look, but once you understand what they do then they "look" pretty darn good! LOL

Here is the URL for the Amazon link to the item I bought.https://www.amazon.com/gp/product/B01AYK8YOY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
=======================================
"Serenity" 2013 SL 12 bars 39k+ miles and counting
Zencar 32a EVSE

Return to “Accessories / Mods”