Gold Member
Posts: 1989
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: Active EV-CAN sampling: cell voltages, pack temperatures...

Thu Feb 08, 2018 3:50 pm

hubaksis wrote:Hi everyone,
I think this is the best topic to ask.
I found out that some values can be requested from a module only after setting it into diagnostic mode by sending a command 02 10 C0.

However, I can't find any details about this mode.
Can you tell me, does it have any expiration time? If so - is there a command to keep it active or just send another one 02 10 C0?
Do I need to exit diagnostic mode after I finished all requests?


I think it exits in about 1-2 seconds. 02 3E 01 will keep it alive if sent once a second. No harm in not exiting. It will timeout anyway.

Posts: 1
Joined: Wed Oct 25, 2017 6:16 am
Delivery Date: 25 Oct 2012

Active EV-CAN sampling: cell voltages, pack temperatures...

Wed Jul 04, 2018 1:57 am

Hello all,
Can some one post the request codes for VIN, DCQC count and L1/L2 count of 2012 leaf? I have already tried the 797 but not getting any respond on 079A.
Thank You.

Return to “LEAF CANBus”