Ronnyandersson
Posts: 2
Joined: Mon Apr 16, 2018 10:12 pm
Delivery Date: 02 Apr 2018

Re: Leaf Spy Lite

Mon Apr 16, 2018 10:23 pm

I try getting started with a Bluetooth dongel and the LS lite. Two dongels have I tested, the first one did was a v2.1 and according to the app not supported for communication. The other one is an v1.5 (confirmed to support ALL communication by "ELM327 Identifier". But the LS lite still shows no stats. It seems to be stuck after config elm the config leaf shows. Number 14 appears and sometimes goes down to 12 or 10 I think.

Logg from lite setup:

2
true
true
false
0
false
false
31
10
5
0.5
false
true
360
0
-16777216
-1
-16776961
-1
-16777216
-65536
0
-16776961
-16737972
-3618816
-39424
-65281
-65536
false
false
false
false
8421
18
false
false
false
126
true
true
0
true
true
-92.5
0
false
false
300
false
false
0
2013
true
false
en
true
false

Ronnyandersson
Posts: 2
Joined: Mon Apr 16, 2018 10:12 pm
Delivery Date: 02 Apr 2018

Re: Leaf Spy Lite

Tue Apr 17, 2018 4:06 am

04/17/2018 9:06:06 00 000 NaN No Backup Data.txt file found!
04/17/2018 9:06:06 00 000 NaN Step 0 - BtAdmin already Initialized MacAdr = 00:1D:A5:68:98:8B
04/17/2018 9:06:06 00 000 NaN Step 1 - Using_WiFi=false Bluetooth=true WiFi=true
04/17/2018 9:06:06 13 000 NaN Step 3 - BtConnect: Trying to connect to BT device 00:1D:A5:68:98:8B 1 (Wait for interrupt)
04/17/2018 9:06:06 03 000 NaN Step 4 - 0.1 sec. Serial Port Opened Successfully & Service Started
04/17/2018 9:06:06 03 000 0 Step 5 - AStreamT Initialize to BTSerial
04/17/2018 9:06:12 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:17 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:22 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:28 05 014 0 Timer Tick cmd # 14

Turbo3
Gold Member
Posts: 1937
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: Leaf Spy Lite

Tue Apr 17, 2018 1:02 pm

Ronnyandersson wrote:04/17/2018 9:06:06 00 000 NaN No Backup Data.txt file found!
04/17/2018 9:06:06 00 000 NaN Step 0 - BtAdmin already Initialized MacAdr = 00:1D:A5:68:98:8B
04/17/2018 9:06:06 00 000 NaN Step 1 - Using_WiFi=false Bluetooth=true WiFi=true
04/17/2018 9:06:06 13 000 NaN Step 3 - BtConnect: Trying to connect to BT device 00:1D:A5:68:98:8B 1 (Wait for interrupt)
04/17/2018 9:06:06 03 000 NaN Step 4 - 0.1 sec. Serial Port Opened Successfully & Service Started
04/17/2018 9:06:06 03 000 0 Step 5 - AStreamT Initialize to BTSerial
04/17/2018 9:06:12 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:17 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:22 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:28 05 014 0 Timer Tick cmd # 14

You need to take an ELM trace and send it to me. See bottom of help for details.

Be sure the Leaf is turned on or it will not respond. Dash gauges need to be active.

Most likely the adapter does not support the full ELM command set despite what version it reports. For the cheap ELM clones the version number is just made up. They like to use v2.1 even when they support less than v1.5.

The recommend OBDII adapter is the LELink.

Turbo3
Gold Member
Posts: 1937
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: Leaf Spy Lite

Wed Apr 18, 2018 9:46 am

Trace received for this problem.

This problem is due to the OBDII adapter not working correctly. I have seen this before and is most likely detective firmware where this bug was never found during testing as the adapter was never tested on a Leaf. All OBDII adapters of this type will fail the same way timing out at state 14 which is the first Leaf specific command. The adapter will most likely work fine on other vehicles but is not going to work with the Leaf.

Recommend getting an LELink for Amazon or directly from the manufacturer who ships worldwide.

http://www.outdoor-apps.com/store1.html

Return to “LEAF CANBus”