Ronnyandersson
Posts: 2
Joined: Mon Apr 16, 2018 10:12 pm
Delivery Date: 02 Apr 2018

Re: Leaf Spy Lite

Mon Apr 16, 2018 10:23 pm

I try getting started with a Bluetooth dongel and the LS lite. Two dongels have I tested, the first one did was a v2.1 and according to the app not supported for communication. The other one is an v1.5 (confirmed to support ALL communication by "ELM327 Identifier". But the LS lite still shows no stats. It seems to be stuck after config elm the config leaf shows. Number 14 appears and sometimes goes down to 12 or 10 I think.

Logg from lite setup:

2
true
true
false
0
false
false
31
10
5
0.5
false
true
360
0
-16777216
-1
-16776961
-1
-16777216
-65536
0
-16776961
-16737972
-3618816
-39424
-65281
-65536
false
false
false
false
8421
18
false
false
false
126
true
true
0
true
true
-92.5
0
false
false
300
false
false
0
2013
true
false
en
true
false

Ronnyandersson
Posts: 2
Joined: Mon Apr 16, 2018 10:12 pm
Delivery Date: 02 Apr 2018

Re: Leaf Spy Lite

Tue Apr 17, 2018 4:06 am

04/17/2018 9:06:06 00 000 NaN No Backup Data.txt file found!
04/17/2018 9:06:06 00 000 NaN Step 0 - BtAdmin already Initialized MacAdr = 00:1D:A5:68:98:8B
04/17/2018 9:06:06 00 000 NaN Step 1 - Using_WiFi=false Bluetooth=true WiFi=true
04/17/2018 9:06:06 13 000 NaN Step 3 - BtConnect: Trying to connect to BT device 00:1D:A5:68:98:8B 1 (Wait for interrupt)
04/17/2018 9:06:06 03 000 NaN Step 4 - 0.1 sec. Serial Port Opened Successfully & Service Started
04/17/2018 9:06:06 03 000 0 Step 5 - AStreamT Initialize to BTSerial
04/17/2018 9:06:12 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:17 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:22 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:28 05 014 0 Timer Tick cmd # 14

Turbo3
Gold Member
Posts: 1985
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: Leaf Spy Lite

Tue Apr 17, 2018 1:02 pm

Ronnyandersson wrote:04/17/2018 9:06:06 00 000 NaN No Backup Data.txt file found!
04/17/2018 9:06:06 00 000 NaN Step 0 - BtAdmin already Initialized MacAdr = 00:1D:A5:68:98:8B
04/17/2018 9:06:06 00 000 NaN Step 1 - Using_WiFi=false Bluetooth=true WiFi=true
04/17/2018 9:06:06 13 000 NaN Step 3 - BtConnect: Trying to connect to BT device 00:1D:A5:68:98:8B 1 (Wait for interrupt)
04/17/2018 9:06:06 03 000 NaN Step 4 - 0.1 sec. Serial Port Opened Successfully & Service Started
04/17/2018 9:06:06 03 000 0 Step 5 - AStreamT Initialize to BTSerial
04/17/2018 9:06:12 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:17 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:22 05 014 0 Timer Tick cmd # 14
04/17/2018 9:06:28 05 014 0 Timer Tick cmd # 14

You need to take an ELM trace and send it to me. See bottom of help for details.

Be sure the Leaf is turned on or it will not respond. Dash gauges need to be active.

Most likely the adapter does not support the full ELM command set despite what version it reports. For the cheap ELM clones the version number is just made up. They like to use v2.1 even when they support less than v1.5.

The recommend OBDII adapter is the LELink.

Turbo3
Gold Member
Posts: 1985
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: Leaf Spy Lite

Wed Apr 18, 2018 9:46 am

Trace received for this problem.

This problem is due to the OBDII adapter not working correctly. I have seen this before and is most likely detective firmware where this bug was never found during testing as the adapter was never tested on a Leaf. All OBDII adapters of this type will fail the same way timing out at state 14 which is the first Leaf specific command. The adapter will most likely work fine on other vehicles but is not going to work with the Leaf.

Recommend getting an LELink for Amazon or directly from the manufacturer who ships worldwide.

http://www.outdoor-apps.com/store1.html

lxvgto
Posts: 2
Joined: Fri Aug 24, 2018 3:37 pm
Delivery Date: 18 Aug 2018
Leaf Number: 326898
Location: PDX, OR

Re: Leaf Spy Lite

Fri Aug 31, 2018 8:29 am

Hello, Newb here, have just ordered the recommended LELink obd2 adaptor from https://www.amazon.com/gp/product/B0755N61PW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1, thanks for posting this recommendation (somewhere, i've been reading so many postings, i can't remember where!).
Now I have gone to get Leaf Spy Lite as recommended by Turbo3 (https://www.amazon.com/Turbo3-Leaf-Spy-Pro/dp/B00PMLTPN0/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1535728571&sr=1-1-catcorr&keywords=leaf+spy) for my Iphone SE.
Unfortunately I cannot find this in the App Store nor on Amazon from my phone.
Did i miss something - is Leaf Spy Lite NOT available for iOS, yet Leaf Spy Pro IS available for iOS?

thanks!
2018-08-19 / Used pearl white 2015 LEAF S / Mfd 2015-02 / In-service 2015-07-28

onemorerick
Posts: 1
Joined: Thu Dec 13, 2018 8:28 am
Delivery Date: 17 Nov 2018
Leaf Number: 324861

Re: Leaf Spy Lite

Thu Dec 13, 2018 9:25 am

I believe that I have a slightly different behavior from Leaf Spy Lite (v0.34.27) than has been described here previously. Car model year is 2015.
ODBII device is ELM 327 Mini. Pairs with Galaxy SIII phone. The lower right hand corner of the app display cycles between the (yellow) Retry in xx Seconds and (green) Connected 1 through 31. After reaching Connected 31 the cycle begins again. The chart displays 119 QCs & 724
L1/L2s on top and 12.40V in the lower left, and the rest of the data values are 0. The information at the bottom middle which displays the software version also has a line below the version which is obscured by the date which overlays that line so I cannot see the firmware version of the ODBII device, though I suspect in may be not be 1.5 as recommended elsewhere in this thread. I tried selecting all the app system settings as well as enabling the slow transfer mode but the behavior does not change. The app does not display anything about missing commands. I can send the device to you if that is useful.

Return to “LEAF CANBus”