Turbo3
Gold Member
Posts: 1959
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: iOS LeafSpy Pro Support

Wed Feb 21, 2018 1:09 pm

Marmelo wrote:Hi,

Today I received my ELM327 OBDII Wifi that I ordered from Amazon (https://www.amazon.es/dp/B00DE8AAX2/ref ... 81_TE_dp_1). I followed your WIFI help/settings but it does not work. Any solution? Do you think this device is not suitable for the LEAF?

The device shows a red led when connected to the LEAF. When I open the leafSpy app it finds the device on the settings but after "Register Current SSID" procedure, the LeafSpy stays yellow. In the OBDII you can find some "action" in the LED display (red always showing but some Blue/Green lights fast blinking) but that's it...

Thanks!

The best way to see what is going on is to take an ELM trace and send it to me. See the bottom of the help file for how to take an ELM trace.

In the status area in the bottom right corner that is Yellow what does it say? There should be a state number on the right side.

Marmelo
Posts: 2
Joined: Tue Feb 20, 2018 9:58 am
Delivery Date: 11 Oct 2016

Re: iOS LeafSpy Pro Support

Thu Feb 22, 2018 5:58 pm

Hi,

In the status area in the bottom right corner that is Yellow what does it say? There should be a state number on the right side.

"Retry ELM 11" (after trying to run options 1 to 10).

E-mail sent.

Thanks for your help and great support!

Turbo3
Gold Member
Posts: 1959
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: iOS LeafSpy Pro Support

Sat Feb 24, 2018 12:52 pm

Marmelo wrote:Hi,

In the status area in the bottom right corner that is Yellow what does it say? There should be a state number on the right side.

"Retry ELM 11" (after trying to run options 1 to 10).

E-mail sent.

Thanks for your help and great support!

Hanging on "Retry ELM 11" typically means the OBDII Adapter is rejecting one of the required ELM commands needed to communicate with the Leaf. Which also means the OBDII Adapter is not fully ELM compatible despite what ELM version number it is reporting. This happens when the manufacturer decides to only support ICE vehicles which only require a limited subset of ELM commands.

garryk
Posts: 4
Joined: Tue Nov 07, 2017 10:04 pm
Delivery Date: 01 Nov 2017
Leaf Number: 206351

Re: iOS LeafSpy Pro Support

Sat Feb 24, 2018 3:39 pm

Hi, Having updated my Leafspy Pro to v1.7.34 en from the Apple store, I am experiencing the problem also reported by others that the Graphs don’t work after clearing. I also get the message ‘Not Saved’ at the top.
I understand there is a fix available to beta testers but I don’t seem to be able to access it, even as an enlisted beta tester,? The beta tester link for the 0.4.111 release (is that the Android version number range?) keeps taking me to Google but, but since I’m an IOS user, it’s not much use.

Is beta testing only available to non-IOS users?

Anyway, any idea when we might expect an update/ fix to be available on Apple store? The loss of graphing is a bit of a dent in the hilly trips range testing I’ve been trying to do this weekend :|

Thanks

cwerdna
Posts: 7831
Joined: Fri Jun 03, 2011 4:31 pm
Delivery Date: 28 Jul 2013
Location: SF Bay Area, CA

Re: iOS LeafSpy Pro Support

Sat Feb 24, 2018 3:42 pm

^^^
Beta testing for iOS apps is usually done via TestFlight (https://developer.apple.com/testflight/). IIRC, the developer will need to collect your Apple ID (email address you use for iTunes Store). Docs at http://help.apple.com/itunes-connect/de ... vdc42b26b8.

'13 Leaf SV w/premium package (owned)
'13 Leaf SV w/QC + LED & premium packages (lease over, car returned)
'06 Prius

Please don't PM me with Leaf questions. Just post in the topic that seems most appropriate.

Turbo3
Gold Member
Posts: 1959
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: iOS LeafSpy Pro Support

Mon Feb 26, 2018 2:49 pm

garryk wrote:Hi, Having updated my Leafspy Pro to v1.7.34 en from the Apple store, I am experiencing the problem also reported by others that the Graphs don’t work after clearing. I also get the message ‘Not Saved’ at the top.
I understand there is a fix available to beta testers but I don’t seem to be able to access it, even as an enlisted beta tester,? The beta tester link for the 0.4.111 release (is that the Android version number range?) keeps taking me to Google but, but since I’m an IOS user, it’s not much use.

Is beta testing only available to non-IOS users?

Anyway, any idea when we might expect an update/ fix to be available on Apple store? The loss of graphing is a bit of a dent in the hilly trips range testing I’ve been trying to do this weekend :|

Thanks

I am not aware of any problem with the elevation/speed graph. As I recall it auto clears when you start a new drive so I am not sure if I have tested manually clearing. I can try next time I take the Leaf out and also have a look at the clear code.

=====================
Looking at the code I see no reason why clearing the previous graph should disable creating a new graph. Again, manually clearing is not needed if you have either saved the previous graph or loaded a previous graph which would include the default graph that is loaded when the app first starts.

There is a case where a graph will not be created and that is if the speed reported by GPS is always zero. In that case no graph is created.

garryk
Posts: 4
Joined: Tue Nov 07, 2017 10:04 pm
Delivery Date: 01 Nov 2017
Leaf Number: 206351

Re: iOS LeafSpy Pro Support

Tue Feb 27, 2018 1:01 am

Well, I've tried everything I can think of

removed running programme, then reopened it,
deleted app and re-installed/ran it from scratch
reloaded a previously saved graph,
tweaking settings like Keep GPS on, and Logging

but the problem still persists (no graph of speed and elevation appearing after clearing the graph,
I notice there is usually a title /file name in the heading of the graph when the program is first installed. but that this disappears after clearing the file, and is replace by the message 'Not Saved'. Is a new file name supposed to be started straight away?or only once you've driven a few km?

Can I revert to an earlier version?

Turbo3
Gold Member
Posts: 1959
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: iOS LeafSpy Pro Support

Tue Feb 27, 2018 2:00 am

garryk wrote:Well, I've tried everything I can think of

removed running programme, then reopened it,
deleted app and re-installed/ran it from scratch
reloaded a previously saved graph,
tweaking settings like Keep GPS on, and Logging

but the problem still persists (no graph of speed and elevation appearing after clearing the graph,
I notice there is usually a title /file name in the heading of the graph when the program is first installed. but that this disappears after clearing the file, and is replace by the message 'Not Saved'. Is a new file name supposed to be started straight away?or only once you've driven a few km?

Can I revert to an earlier version?

When you are driving does the top of the graph show the current speed or is it always 0? Same with elevation.

You only get a file name when you have saved the graph and a file then exists. Until you save it you will see Not Saved because it is not saved yet.

garryk
Posts: 4
Joined: Tue Nov 07, 2017 10:04 pm
Delivery Date: 01 Nov 2017
Leaf Number: 206351

Re: iOS LeafSpy Pro Support

Tue Feb 27, 2018 1:21 pm

Speed/elevation stay at 0.
Log file is also recording 0s in GPS, even tho GPS is on

Date/Time Lat Long Elv Speed
28/02/18 8:09 0 0
28/02/18 8:12 0 0
28/02/18 8:13 0 0
28/02/18 8:18 0 0

ERRdata.TXT is also reporting a bad ATE0 response. Could that be related?

2018/02/28 8:08:32 04 2 65 Bad ATE0 response: ELM327 v1.5

Thanks for your help

Turbo3
Gold Member
Posts: 1959
Joined: Mon Jul 19, 2010 8:34 pm
Delivery Date: 12 May 2011
Leaf Number: 002191
Location: San Jose, CA

Re: iOS LeafSpy Pro Support

Tue Feb 27, 2018 2:31 pm

garryk wrote:Speed/elevation stay at 0.
Log file is also recording 0s in GPS, even tho GPS is on

Date/Time Lat Long Elv Speed
28/02/18 8:09 0 0
28/02/18 8:12 0 0
28/02/18 8:13 0 0
28/02/18 8:18 0 0

ERRdata.TXT is also reporting a bad ATE0 response. Could that be related?

2018/02/28 8:08:32 04 2 65 Bad ATE0 response: ELM327 v1.5

Thanks for your help

I believe the problem is due to Apple requiring a special warning be given to the user when an app access GPS.

Without that message being given iOS blocks an apps access to GPS which is why you see 0 for the speed which then results in no data being graphed.

This new requirement seems to have been introduced in one of the recent iOS updates. I will need to added one text line to the configuration file in the next release which iOS will then use to create a popup question about allowing the app to access GPS.

I actually already have this message in the configuration file but now they want it twice for some strange reason.

============================

You might be able to go into iOS Settings and scroll down and select LeafSpy and then manually allow LeafSpy access to "Location" "While Using".

Return to “LEAF CANBus”