Turbo3 wrote:Marktm wrote:Turbo3 wrote:I have ordered one for testing. The adapter must support the ELM327 AT command set including setting the header response information (AT SH, AT FCSH, AT FCSD).
I have one that looks like this one from Xtool and it does not support the AT command set so can not be used with the Leaf.
Thanks - let us know your results. Asking for such (AT commands) information from the (Chinese) suppliers is usually at best very confusing!
I just received this OBDII adapter and did a quick test. This adapter does not seem to support all the needed commands. So it is not suitable for the Leaf or LeafSpy use. When I have more time I will look to see exactly which command it is rejecting.
I went ahead and purchased the LELink dongle and LeafSpy Pro to use with my iphone 5s. After a few days, it appears LELink has lost it's "link". No update - the bottom right is yellow and states "config elm 00" - no cycling of codes and no update of data. Is there a "reset" that can be sent? I tried reconnecting the LELink physically with no change. I also re-installed LeafSpy to no avail. Anything to try except send it back?
I do have an app called LightBlue that can send ascii codes (ATXXX) directly to the dongle?