I have a question about TPMS settings after a tire rotation.
When I had my tires rotated previously, I went through the calibration steps, but I thought I'd use the new-ish feature to swap locations.
Should that affect the mapping of the TPMS ID numbers in the Tire Registration screen?
Mine are still in the same place as they were before.
I see "Enable Tire Remapping", with an A-B that I selected, and I got a little shaded set of arrows.
I drove a little, but the Tire Registration showed the same positions for the TPMS IDs.
I didn't notice the actual tire pressures before and after on the Power+Pressure screen to track it there.
I see "Enable Virtual Registration" which looks like a different way of saying the same thing as the above.
I clicked that one, and the TPMS ID are still in the same locations, but this time, I did notice that the pressures moved in the Power+Pressure screen. (conveniently, I have 39, 39-1/4, 39-1/2, 39-3/4, so I can see them move).
Now, I don't know whether I changed them, and changed them back, or where my tires are actually located.
Is the Tire Registration TPMS listing supposed to change?