Problem here: the black and white wire is not in socket #18, but is in socket #19. Attaching to the black and white is "always on", irrespective of ignition position. Attachment of the light's negative to the chassis ground also results in "always on". The red wire is attached via a tap to the red wire, about 14ga, which is inside #57 on the other plug. I've not found a configuration which controls the led lights via the ignition, as described in the original post.
Your advice and guidance will be appreciated.
My LEAF is as described in my signature, below.
Ira est potens et pertinax.
Study History - Know the Future
N4CVX; ex-VP2EHF; ex-DA1BB; ex-KR6DEM
2012 SL Glacier Pearl VIN: 1567 Delivered 12-11-2011
Cool Springs Nissan, Franklin, TN