Recent content by Drc38

NB - Replacing the charger unit (PDM) fixed the issue.

When clearing the HEV/EV DTC turtle mode disappears then returns and the green charging light flashes, not sure if this is simply normal or could be useful information? I'll try an active poll of the charger next at 0x792

Thanks, I've done a couple of 12V disconnects and clearing of DTCs. I'll try a few more times just in case.

The V2H unit is a Setec, hard to know where the flashover occurred but a capacitor between the DC rails blew and there is also carbon on the units DC connector.

While discharging via a V2H unit from an AZEO leaf the V2H unit flashed over / blew a capacitor on the DC side and presumably triggered some DC protection circuits (or caused a failure in the car) . The car still drives but is in turtle mode and will not charge. It threw the following errors...

On my 2016 Leaf this seems to be static at 7F so it doesn't appear to be an actual voltage reading, I think I would need something on the EV-CAN bus ideally.

I'm interested in monitoring the power flow on the Leaf's low voltage (12V) system. Does anyone know where to look for the DCDC converter's can bus voltage and current messages? Cheers

I've just bought a 30kWh Nismo Leaf JDM. A couple of features would be good to tweak via CAN query of the eeprom content extract/modify/reload. Eg turn off the dash internal reverse buzzer (as opposed to external VPS) and reduce the power steering assist level. Appreciate there are other ways...