Recent content by IonTurkey

Thank you Damien (are your Jack Bauer wtb? :) ) for uploading your code, it is very helpful. I have now implemented the messages: 10ms: * 1d4, * 11a, * 1db, (for charge mode only): * 1dc, * 1f2 100ms: * 50b * 55b * 59e * 5bc I did not implement the...

Thanks for linking this. For the DC-DC converter I agree with the connections you mention. However, you also seem to need the EVSE connect signal and communication PWM wires connected for the on board charger. When I wired these up, my EVSE got an error, without them, nothing happens. Damien...

https://www.youtube.com/watch?v=VY6NXMZGARo Damien did it :D Cant wait to try this out with my setup. I do not use the zombieverter, but run the commands found by Celeron55 (http://productions.8dromeda.net/c55-leaf-inverter-protocol.html) needed to run the inverter (11A, 1D4 and 50B). Hope...

That is great news! Sounded in his video that he was going to start with the Gen 3 inverter. Maybe he was quick with that :P

I'm planning to reproduce this code to get the charger going (on a gen2). Did you manage to get it working? I noticed that the sequence control for ID4 message might have an error. According to your annotations the cycler should be {0x87, 0xc7,0x07, 0x47}, but your code is {0x87, 0xc7,0x07, 0x45...

Great work on the Buggy! It is nice to see someone is using the OBC in their setup. Are you using the hack where you control the current using the pin 6 on the MCP4728? or did you get your friend Taras can bus method to work? I bought a motor/invert/OBC stack from a 2014 Nissan Leaf from the...