Recent content by Irling

Dear friends, I really need help. I am looking for a current sensor for a 62 kWh model (lem HAH1BV-S/D24) or contactor box 294A1-5SF0A, If you have this part or you know where to buy, please write to me, thank you :!:

map40home Congratulations on your purchase of an extra battery. What is your body? Zeo? Azeo? How do you want to connect an extra battery, before or after the current sensor? How do you want to solve the turtle problem after using all 285 GiDs ?

Do you planning to develop a technical solution to the turtle problem after the 285 gids in the azeo? Is it possible to develop alternative BMS firmware?

Use LiNMC battery elements (3.65V., for example LG Chem 60ah Chevrolet bolt) We are waiting for a response from Mux, what will happen to his device when the LBS spends all 285 GIDs

You need to use 114 elements. However, if you plan to install an additional battery in AZEO, then you will encounter the same problem as me. First, the COX will increase to 103% (if the second battery is connected correctly, transfer the current sensor), you will receive 285 energy GID for work...

There is no need to reset, SOH grows independently if the second battery is connected correctly (it is necessary to transfer the current sensor to another location) I will update the firmware of my azeo in about a week, take a screenshot :)

If I'm not mistaken, It is this parameter that is used to calculate the amount of energy in LBC and VCM. As soon as the maximum limit for the GIDs ends, a turtle appears. Therefore, to solve the problem of turtles, an update to the AZEO24 firmware on the AZEO30 is required

Thank you, I am using an extra battery, and my SOH is constantly growing. It used to be 86, and now it is 91.7, but now we have a cold temperature, about - 15 degrees, and the recounting has stopped. The main problem is how to increase the GID in BMS? In a week, I will try to update the firmware...

if the second battery does not have bms, and one bms is used for two batteries, this will not work correctly? what happens when bms 24kwh aseo counts 285 Gids?

Maybe the Mux solution doesn’t work too well, because the whole problem is hidden in the LBC Module. For AZEO, this module has a maximum capacity of 285 Gids., We can correct any readings on the dashboard, however if the battery has a capacity of more than 285 gids, there will still be a...

Hi Mux, how are you? Is your device available for order? I plugged in a second battery, however the turtle appears after 24 kilowatts of energy has been consumed

Please tell me whether it is possible to use the module LBC Leaf 2014 for autonomous operation in BMS mode? I want to use this module to control the voltage of 96 cells and emergency shutdown of the second battery if the voltage parameters exceed the critical values. Is it possible? I would...

Thank you very much for your response. Yesterday I used an additional current sensor, which I installed on the last element of the battery (positive wire). For the experiment, I will make three wires, one common, and the other two will be connected before the current sensor and after the sensor...

Therefore, I am waiting for your decision :) What exactly won't work? Move the current sensor to its extreme position?

You are in a specialized forum, and the people who read it carry out any actions at your own risk. I understand your concerns, but you do not need to create a problem out of it, otherwise any technical forum will be useless :)