Search results

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. P

    Leaf Spy pro and Fire HD10 tablet

    I am running LSP 0.53.194 on a 2018 SV with a Fire HD10 tablet (no GPS). I am using an app for the GPS receiver called Bluetooth GNSS and it is connecting to the receiver ok. For GPS I am using a Garmin GLO2 receiver, both for Google Maps and (hopefully) LSP. Maps works ok but LSP display GPS...
  2. P

    12V battery went "bad" after VCM recall?

    Thank you for the quick reply!!! I appreciate the info! Your battery's BMS behavior is what I need also, but the PowerQueen's BMS did not do this, like I indicated. The PowerQueen is a very good battery with good support and I use several of them on my UPS's, but I also use a LiFePO4 charger...
  3. P

    12V battery went "bad" after VCM recall?

    I am also thinking of replacing my cheap lead acid (NOT FLA) with a LiFePO4. Which one did you purchase? I ask because some of them have their BMS's cut out when the voltage reaches 14.6v, but will not reconnect until the input is removed. This is NOT good because when the "ignition" is shut...
  4. P

    Replacing 12V Battery with LiFePO4 (Video)

    I tried a Power Queen 50Ah LiFePo4 in my 2018 Leaf and it failed to work! The BMS in the battery disconnects when the input voltage exceeds 14.6 and will not reconnect unless a higher voltage is applied to the battery. This would leave you with a disconnected 12 battery with no way to start the...
  5. P

    Leaf Spy Pro crashes with error popup

    That is what I kinda thought at first, but I figured it out and thankfully NOT hacked. I also see the cell voltage screen flipping out as well... don't know what that is all about yet though.
  6. P

    Leaf Spy Pro crashes with error popup

    Yes, I am on beta channel BUT I found the culprut! it is NOT LSP!!! (didn't think it would be though). Turned out it was an app that I have been using called Charging Monitor. It has been working great but I updated last night (5/16) about the same time I started using the "c" option. I did...
  7. P

    Leaf Spy Pro crashes with error popup

    First, running LSP ver.. 0.45.136en. I am starting to use the "[email protected] mi/kwh" calculation on screen 4. Miles>LBW. I have tried the "t" and "i" settings and they seem to work great, but when I startup my tablet in the "c" calculation, I get a popup that says the application has crashed, and...
  8. P

    Leaf Spy and Leaf Spy Pro

    That's it! He may respond within the day, or it may be a couple of days, but he WILL respond. Just treat him with respect and he will do the same to you. He is a great resource and know the Leaf very well.
  9. P

    Leaf Spy and Leaf Spy Pro

    I have been conversing with turbo via his email contact address in LeafSpy, and he has been very helpful and responsive. Maybe try sending him an email?
  10. P

    Leaf Spy and Leaf Spy Pro

    So how do I get my message to him?
  11. P

    Leaf Spy and Leaf Spy Pro

    HELLO......???? Anybody????? Is this thread dead? Has anyone even read my post? I am NOT a flake! Bill
  12. P

    Leaf Spy and Leaf Spy Pro

    I have asked this question before and haven't gotten any responses or answers, SO I will ask it another way.... What parameters can be displayed as a gauge? I have made several on the custom screen and for some reason LS crashes. Haven't found any clues as to why either. Also, are there any...
  13. P

    Leaf Spy and Leaf Spy Pro

    ANYBODY have any ideas bout the custom gauges crashing LS????
  14. P

    Leaf Spy and Leaf Spy Pro

    Well connecting the negative to chassis will not measure any current then because the battery is not providing the power, but the DC-DC is, and is not being measured. I don't see why the big deal about running the current through the current sensor though. I imagine that any current passing...
  15. P

    Leaf Spy and Leaf Spy Pro

    Depending on where you connected the negative for the inverter, the current that you are drawing must pass through the ground cable. Remember, the current sensor is on the negative terminal from the 12 v battery so the inverter current must pass through the sensor. IF you have connected the...
  16. P

    Leaf Spy and Leaf Spy Pro

    Guess I should mention: 2018 Leaf SL manuf in Jan of 2018. Leaf Spy Pro ver. 0.45.124 en OBD2 dongel: BAFX Products OBDII diagnostic Interface. I also have the Konnwei OBDING BLUETOOTH dongle with the correct bus termination resistor (120 ohm), and the LELink 2. The reason I am using the BAFX is...
  17. P

    Leaf Spy and Leaf Spy Pro

    I have been playing around with some gauges on the custom screen, and have run into problems. I have tried to go by the default screens and adding/deleting items for my custom screens, relying on the LeafSpy documentation. A couple of my custom gauges make LS crash as soon as they try and...
  18. P

    Leaf Spy and Leaf Spy Pro

    What do you mean.. concert outside temperature option?
  19. P

    Leaf Spy and Leaf Spy Pro

    Also wanted to ask about LeafSpy pro. I got brave and created a custom dashboard with motor rpm, motor temp, hv battery amps, 12 v battery voltage, and vehicle speed. When I start moving, if only 5 mph, LeafSpy crashes. I am guessing it is the vehicle speed doesn't work, so I am going to delete...
  20. P

    Leaf Spy and Leaf Spy Pro

    Got back from my Nissan dealer and the update is complete! Both the ? (HV battery 2, I think) and the HV battery are at 5SA2B (for the US, that is the update version). It was 5SA2A. Also got the Consult printout, but it only shows today's update, but that is good enough. Got the front axle...
Back
Top