Search results

can you share more info about this hardware"box" and also tell us where exactly you connect it after the odb2 thx

Thx for this extra info..... When I understand it right, only hardware buttons can be generated by the AV-CAN bus The OK button at each new startup of the car witch must be accepted on the touchscreen ( to accept NissanConnect) can NOT be generated then? In the same context, as anybody the...

@Mux Great idea…… Perhaps some software that can send CAN messages over a LE dongle, so the dongle can be stay plugged in the car for use with leafspy and also for sending special CAN messages. or a hardware piece male/female ODB connectors housing with in between the µp for sending the CAN...

@ dala, thx for that already do you have code for pressing the Ok button on the touchscreen at startup? what do you think, is it possible to send these codes by a odb adapter with elm AT instructions, and so yes have you experiance into this by giving us a AT sequence to do such a thing thx...

@Dala: already some progress? how and where inject your code?

Hello, did also a quick test at my 2018 leaf and must conform that logfile writing now works with 0.45.122 with unchecked log voltage cells did some futher checks on leaf spy pro active and leaf off, the clicking relay noise is still there, my tests before where not ok, because we must wait a...

Only get it one time, was hot able to reproduce it...…. the file holded one logline with all entrys like before, just all voltage cells where at zero value edit: when i think further: the created log file could be from the first time i started leaf spy pro because i started with the checkbox...

yes checked out also the 0.45.121: can conform that there is no logging with unchecked log Voltage cells….. However the very first time i tried there was a new log file created but with only one logline in it and all the cell readings at 0 I reconnected some time but no mode writing fhurter to...

@Turbo3 Can comfirm what crunchy3D say's: checked log cell voltage's will write to the log file, unchecked no writing at all is done to the log file..... just did the test on my 2018 leaf. Is it possible that the vent speed and airco status is not working on the custom screen with 2018+ leafs...

I understand that from leaf 2018+ there is no more (passive) CAN activity onto the ODB plug. another approch can be when the leaf is off (asleep) and leafspy begins to poll with active CAN commands AND there is no answer (fi polling the SOH or VIN will not give a valid responce) than instruct...

Welcome back Turbo3 :) I will check out asap this testversion for android onto my leaf 2018 and keep you informed here..... Already some remark: the relais clicking noise is also there onto a 2018 Leaf when the car is off (with the last official version) do I think the safe mode you...

@caederus have 2018 leaf tekna 40kw, can you explain exactly how to send an active request on 7xx adresses with a ELM module over the ODB plug. you may also PM me

I agree, without the help of Turbo3 there is no possibillity to add parameters to the log files..... @Turbo3: Is leaf spy pro development stopped for ever ? When it is a matter of google play new policy to accept the " can make phonecalls" when installing the Android version of leaf spy pro...

I think that column E is the measured speed from GPS system, in fact the real speed..... regards

@turbo3 Will the custom screen with possibillity to make gauges with parameter readout at higher speed be ported to Leafspypro in Android version? Thx

Hello, The 2018 leaf does not have a monitor function onto the CAN bus, this is disabled by Nissan because to many data will flow out.... older leafs have this monitoring function and can be readout by a elm327 interface. I know it is possible to read and write CAN id adresses but I have no...

nice tool. thx.....

@turbo3 first of all glad to see you again on this forum.... can we as android users help with testversions onto the 2018 leaf, is there already a new android testversion of leafspy pro with the gauge custom functions and the new tire pressure readings? regards

@crunchy3d Please read my pm to you…… thx

also relieved… hope to read soon from turbo3