Search results

My 2011 left tail light assembly has a couple of the red led bulbs that are not turning on. Would I have to replace the whole assembly (instead of individual bulbs)?

Holy crap, after hundreds of times trying, I finally got it! I don’t remember doing anything special, but it came out and is replaced! I cleaned off the housing just in case it was dusty or something sticky on it. So happy.

I’m happy to hear it’s not just me. I’ll keep at it. I definitely feel it loosen when I turn it. So, it’s not brute force , and just getting the correct angle?

2011 LEAF. My drivers side front turn signal was not working and I had the rapid blinker sound come on. I figured I just needed to change the bulb (which I’ve done in the past on the passenger side). When attempting to change the bulb, I couldn’t get the bulb out of its housing. It turns and I...

Very helpful links! Thanks! Wasn’t sure if I’d need this https://ve.simonandre.ca/leaf-2/

Gen 2 lizard battery 24kwh

Can you swap a gen 2 24kw battery from a Leaf to a 2011 gen 1 Leaf, without needing any modules/other equipment?

Ended up buying a used Siemens versi charge from fb marketplace for $100. Didn’t come with a mount, so it’s not pretty, but it is functional. I’m just glad it wasn’t my on board charger. Now I need to figure out how long my 7 bar 2011 will last and if it will be worth it to look into...

I opened up the handle, but didn’t see any loose wires. I blew out the plug with a compressor again. It worked today without too much wiggling around. We’ll see how long this lasts.

Found some on amazon. I guess worth a try. Thanks for the clipper creek suggestion

I wanted to try, but they used weird screw bits (5 Star with a center pin) to secure the handle. I guess I understand why they did that, but it stinks.

2011 leaf, I have a blink L2 evse at home. I had intermittent issues with charging. It would take several plug in/outs to get charging going. It’s even less consistent now. So much so, that I’m only trickle charging, which has no issues. Someone suggested blowing the plug and receptacle with an...

OP here....good news. 3 for 3 after blowing compressed air. Good to know in the future where to start!

I don't want to get too excited, but after blowing compressed air, the EVSE started on the first try! Hopefully that's all it was and I thank you very much!

I'll try that now. Thanks. I did blow in there just using my breath. But I'll use my compressor now.

2011 Leaf. Blink model we-30cire EVSE. When I use it, I get varying results. It seems like if i jiggle the handle after I connect (I always get 1 connection beep when inserting handle into car), this sometimes helps. Otherwise, the EVSE reads "Please plug in car" even if it is plugged in. I...

Makes sense to me, thank you for the write-up

Genuinely curious on this option: So, you buy the DIY kit. Then you find a salvaged Leaf, or you can find a salvaged 40-62w battery online? Then have it shipped? For people like me who can't DIY the battery swap, I would work with a local mechanic that can do the swap for me? How many...

Great info/explanation, thanks!

Very good point, I wish I knew how to do something like that! I’m good at following directions on YouTube, but sadly not as good at basic electrical skills!