My 2015 Leaf with lowered with 19" wheels

[minispeed]

What tire did you put on and in what size?

[Armadillo]

I like it! What is the width and offset of those wheels?

I'm on the same coilovers. If you're already maxed out on the coilover adjustment and want to go any lower, you can also remove the lower two locking rings. it will give you another 1/2" of drop. You can also make some different upper mounts for the rears to keep from bottoming out that will also give you about another 1/2 to 3/4" drop. I can send you a picture of what I made if you want.

[bryanlee]

What tire did you put on and in what size?

I have Pirelli 235/35/19 pzero nero - super grippy, lol

handles on rails

[bryanlee]

I like it! What is the width and offset of those wheels?

I'm on the same coilovers. If you're already maxed out on the coilover adjustment and want to go any lower, you can also remove the lower two locking rings. it will give you another 1/2" of drop. You can also make some different upper mounts for the rears to keep from bottoming out that will also give you about another 1/2 to 3/4" drop. I can send you a picture of what I made if you want.

Yes please send me a picture, I would like to see with the extra drop. Does it make the ride a lot more rougher? Did you adjust the dampening at all from the factory setting?

Thanks

[Belvedere]

Looks good man! Please post m/kwh data when you can, curious to see that as another poster mentioned.

[mjbull13]

Looks awesome! Nice job, that is one sexy Leaf!!

[LeafMuranoDriver]

Looks really good! Nice work!

[leafbeef]

Can you tell me what 19" wheel and tire dimension you are using for this fab setup... In particular width and offset!

[leafbeef]

Just in case some else is looking for the information, the wheels are TSW Bathurst 8x19 offset 35

http://www.tsw.com/alloy_wheels_bathurst.php

This is how they're positioned compared to stock 16":

http://www.willtheyfit.com/index.php?wi ... offset2=35

[LTLFTcomposite]

Has anybody gone the other way and made a jacked up LEAF? I think the term is "donk". Sorry to go OT, not sure the Q warrants its own thread.