Page 4 of 4

Re: SAE J1772 inlet port Dimensions

Posted: Mon May 13, 2013 1:30 pm
by borland
No. I don't want anyone putting graffiti on my graffiti art. Nothing very complicated here that you can't duplicate very quickly. Besides, the Autodesk's 123D Design free software has some bugs that create problems modifying existing drawings, so it's best to start with basic shapes when learning to use the program.

The biggest problem is with printing. The hobby/open source 3D printers require calibration and settings that most operators don't fully understand.

Re: SAE J1772 inlet port Dimensions

Posted: Mon May 13, 2013 4:20 pm
by MikeD
Sorry to be somewhat off topic, but has anyone measured the diameter of the charging cable on the 2013 level 1 EVSE? Is it still ~11.5 mm as was the previous years, or is it thinner?

Re: SAE J1772 inlet port Dimensions

Posted: Mon May 13, 2013 4:43 pm
by jclemens
I can't believe you guys missed this. :?
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!

Re: SAE J1772 inlet port Dimensions

Posted: Mon Nov 11, 2013 12:03 am
by UBUYGAS

Check out my Install and review pictures here: http://www.mynissanleaf.com/viewtopic.php?f=37&t=15077" onclick="window.open(this.href);return false;




Thanks Joel for posting your link below! I just bought one of these:

Image

You don't happen to have WHITE PLA?


http://erroneus.myevblog.com/buy-plastic-parts-here/" onclick="window.open(this.href);return false;




jclemens wrote:I can't believe you guys missed this. :?
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!

Re: SAE J1772 inlet port Dimensions

Posted: Mon Nov 11, 2013 11:28 am
by jclemens
Sorry, no white, Once I use up the dark blue PLA, I will get white next time. You are not the first to request it.
The dark blue was a mistake as I was trying to order glow-in-the-dark blue.
I will be sending you grey and you'll get an email as soon as it goes out.

Re: SAE J1772 inlet port Dimensions

Posted: Tue Nov 12, 2013 5:53 am
by UBUYGAS
Thanks!

Can I spray paint the unit?


jclemens wrote:Sorry, no white, Once I use up the dark blue PLA, I will get white next time. You are not the first to request it.
The dark blue was a mistake as I was trying to order glow-in-the-dark blue.
I will be sending you grey and you'll get an email as soon as it goes out.

Re: SAE J1772 inlet port Dimensions

Posted: Tue Nov 12, 2013 9:54 am
by jclemens
I have painted PLA in the past, but with a brush, not sure how it would take a spray, it might work.
I'd suggest masking the input area as to not get paint flakes in your charge plug.

Re: SAE J1772 inlet port Dimensions

Posted: Thu Nov 14, 2013 2:46 pm
by GlennD
jclemens wrote:I can't believe you guys missed this. :?
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!
I just printed this out. The latch feature is an improvement.

Thanks for the link.