Installed my ABB 22kW EVSE (but turned it down to 11kW)

[Dala]

Hi, just completed installing and getting my EVSE certified, it's an EVLunic Pro specced up to 22kW! I installed it with 6mm^2 wiring, so the wiring is up to the task, but unfortunately my main fuses are 3x25A, so I had to turn the EVSE down to 3x16A. But it should be plenty fast for me

https://www.youtube.com/watch?v=zVELFm0866M

[SageBrush]

Nice holiday present

Dumb question: Why can't you set the EVSE to 20x3 ?

[jjeff]

Does your ABB box output to the QC port of the Leaf? If not I don't see how you could charge at more than 6.6Kw using the Leaf J1772 port......
Also what is your 3-phase voltage? In my area it's either 120v/208v or 277v/480v. Unfortunately, the Leaf J1772 maxes out at about 260v so you can't even feed the 277v to the Leaf, it has to be either 120v, 208v or 240v. No homes here really have 3 phase power, almost all are 120v/240v and places like apartments are 120v/208v 3-phase.

[jlv]

Does your ABB box output to the QC port of the Leaf? If not I don't see how you could charge at more than 6.6Kw using the Leaf J1772 port......

I think he hinted at a future answer to this at the end of the video (at 9:07).