I took some pictures while I was working on repairing the broken release latch on a 2013 leaf 110v EVSE handle. In particular I believe seeing the locations of the metal pins may be useful to others wishing to perform this repair.
As far as the repair itself goes, I simply glued the broken off side pegs back to the latch arm and then drilled a hole through them for a metal pin to provide them with more support.
https://ibb.co/album/MB0MYD
As far as the repair itself goes, I simply glued the broken off side pegs back to the latch arm and then drilled a hole through them for a metal pin to provide them with more support.
https://ibb.co/album/MB0MYD