referring to the same post: http://www.mynissanleaf.com/viewtopic.php?f=36&t=26210
The build microphone can be used for OEM stereos with a little adapter. The Leaf uses a Mic Amp that amplifies the microphone signal and adds about 2 V DC to the signal as documented in the manuals found at nicoclub.com. OEM Stereos require an un-amplified signal without DC component. The little adapter uses a capacitor to filter out the DC component and then a resistance divider to lower the mic signal. I have used that circuit in a 2016 Leaf with both Sony and Pioneer Radios and it works well. You need to make sure to provide 5V to the original Mic Amplifier, which you can either take from a USB output of the OEM Stereo or any USB adapter.
The 2015 and earlier models provide 5V from the original BT module, which can be reused as mentioned at http://www.mynissanleaf.com/viewtopic.php?f=36&t=23887
. The 2016 and later models do not provide 5V other than from the original Stereo.