Page 2 of 2

Re: Homemade cargo cover?

Posted: Mon Jul 08, 2019 7:47 am
by retrodog
Nubo wrote:
LeftieBiker wrote:
One other thing: I had a problem with my forehead hitting the one in my 2015 Leaf. It was a very hard and coarse material edge and it cut my head on a few occasions. I eventually got a roll of rubber edging, cut to length, and put two strips on the cover. It protected my forehead on numerous occasions and encounters with that stupid cover.
I use black foam pipe wrap tubing to protect the car door from a shelf in my garage. I think I'll try the smaller diameter stuff on the cargo cover edge.
You could also try some "split loom" cable wrap. That should grab tightly enough without bothering with adhesive.
If you don't mind the impact, just don't want to get cut, the most stylish solution is to use the door trim, available at an auto parts store, designed to attach to door edges and keep them from getting damaged when opened into other things. I've used that before, in similar situations, and it is very effective for keeping edges from breaking the skin. The stuff is very similar to grommet trim, but designed to go along a straight edge instead of curved.

Re: Homemade cargo cover?

Posted: Mon Jul 08, 2019 12:41 pm
by LeftieBiker
If you don't mind the impact, just don't want to get cut, the most stylish solution is to use the door trim, available at an auto parts store, designed to attach to door edges and keep them from getting damaged when opened into other things. I've used that before, in similar situations, and it is very effective for keeping edges from breaking the skin. The stuff is very similar to grommet trim, but designed to go along a straight edge instead of curved.
Trim like that comes in multiple degrees of hardness, from actual metal to soft rubber. The softer versions should work.

Re: Homemade cargo cover?

Posted: Tue Aug 25, 2020 1:46 am
by beerlugger
Bought myself a full size spare wheel fitted with an asymetrical tread,it just fitted in nicely next to the bose speaker,my cable bag and bits and piecesI fit nicely in the center of the wheel.I cut down an old cover board from a toyota yaris hybrid and it fits on top leaving a lovely flat boot (trunk)I tried to post images but the img button dosnt seem to work.

Re: Homemade cargo cover?

Posted: Tue Aug 25, 2020 3:25 am
by LeftieBiker
To show an image, upload it to a hosting site like IMGUR (NOT Photobucket) and post the image url here. Then highlight the url and use the Image button that way.