My Nissan Leaf Forum

Turbo3 wrote:... Lots of small fixes plus DTC clearing for the PRO version.

Did not have time to validate the DTC clearing the away I wanted too but I needed to get all the fixes out. So post any issues with DTC Clearing and I will fix them in the next release.

I used the DTC clearing to get rid of the HVAC codes that I generated earlier. Thanks for adding this ability.

The only comment is that when reading and clearing on my tablet, the progress bar in the top left corner halfway obscured some other items that were already on the screen. Not really an issue, but it just looked odd. Could be just my tablet and that I had it in landscape mode at the time.

LEAF Spy Pro v29.17 is there, but the description in
What's New still just mentions the v28 versions.
As usual, splendid work.

Suggestions, put the descriptions of the new versions
and the newer features at the top of the description,
rather than at the bottom, so that viewers will easily see
the new features and fixes, and better understand,
without scrolling the descriptions, what the new features
are, and why they should want to update.

palmermd wrote:

Turbo3 wrote:... Lots of small fixes plus DTC clearing for the PRO version.

Did not have time to validate the DTC clearing the away I wanted too but I needed to get all the fixes out. So post any issues with DTC Clearing and I will fix them in the next release.

I used the DTC clearing to get rid of the HVAC codes that I generated earlier. Thanks for adding this ability.

The only comment is that when reading and clearing on my tablet, the progress bar in the top left corner halfway obscured some other items that were already on the screen. Not really an issue, but it just looked odd. Could be just my tablet and that I had it in landscape mode at the time.

It would be helpful if you could provide the type of tablet and a screenshot of the problem. Is it overlapping to the top, bottom, left or right or some combination?

I see on my Nexus 7 the bottom does extend a little into the DTC text area but not over the actual text just the yellow background area.

garygid wrote:LEAF Spy Pro v29.17 is there, but the description in
What's New still just mentions the v28 versions.
As usual, splendid work.

Suggestions, put the descriptions of the new versions
and the newer features at the top of the description,
rather than at the bottom, so that viewers will easily see
the new features and fixes, and better understand,
without scrolling the descriptions, what the new features
are, and why they should want to update.

I will be updating the Play Store descriptions and images later today. Will reorder history as you suggest.

Update 2:10 PM PST: Just updated Leaf Spy Pro history and images for 0.29.17. Give it 90 minutes to show up.

palmermd wrote:

Turbo3 wrote:... Lots of small fixes plus DTC clearing for the PRO version.

Did not have time to validate the DTC clearing the away I wanted too but I needed to get all the fixes out. So post any issues with DTC Clearing and I will fix them in the next release.

I used the DTC clearing to get rid of the HVAC codes that I generated earlier. Thanks for adding this ability.

The only comment is that when reading and clearing on my tablet, the progress bar in the top left corner halfway obscured some other items that were already on the screen. Not really an issue, but it just looked odd. Could be just my tablet and that I had it in landscape mode at the time.

I have adjusted the height of the progress bar so that it will not extend down into the list of DTCs. It will be in the next release.

Is that the problem you are seeing on your tablet?

Turbo3 wrote:

palmermd wrote:

Turbo3 wrote:... Lots of small fixes plus DTC clearing for the PRO version.

Did not have time to validate the DTC clearing the away I wanted too but I needed to get all the fixes out. So post any issues with DTC Clearing and I will fix them in the next release.

I used the DTC clearing to get rid of the HVAC codes that I generated earlier. Thanks for adding this ability.

The only comment is that when reading and clearing on my tablet, the progress bar in the top left corner halfway obscured some other items that were already on the screen. Not really an issue, but it just looked odd. Could be just my tablet and that I had it in landscape mode at the time.

I have adjusted the height of the progress bar so that it will not extend down into the list of DTCs. It will be in the next release.

Is that the problem you are seeing on your tablet?

I think so. I only went through the sequence once, but I just remembered that something existing on the screen got partially overlapped by the progress bar and then the bar went away once it was done. I'll try again later tonight to see for sure.

Here is a peak at the next new screen. It will show real time split between friction (red) and regeneration (green) braking. Chart below will show last 10 second history. Actually, 95% of the code has always been in Leaf Spy just not linked in.

Since the app needs to be in listen mode all other data collection will be suspended while displaying this screen. When you switch away from this screen it will take a few seconds for the old screens to update with latest data (Gids, Battery Data...).

Also this screen and the Service screen are mutually exclusive. So while the Service screens are active you can not view braking. They both reside at the 5th page location.

It will be added to both Leaf Spy and Leaf Spy Pro.

Cool feature!

kubel wrote:Cool feature!

Definitely!

Some ideas for features for this screen:

* Hold the peak value (especially regen) so it's easy to see the peak level that is achieved until reset.
* I believe that somewhere it's possible find the max battery charge/discharge power levels. I have no idea what CAN msg this would be under. This would be useful for seeing what the theoretical max battery charge/discharge the LBC thinks the battery can take and compare to actual charge/discharge rates.

Here is a screenshot of the first signs of life for the new braking page.

This is was taken while the Leaf was in the garage and just pressing the brake pedal so no green regeneration. Actual data while driving will probably be smoother.

When the brake is not pressed the data stops scrolling to the left. I have some scaling issues as I can max out the chart before the brake is fully pressed. At least for debug I will add the raw target and regeneration numbers below the top bar display.

The brake data comes in at 100 frames per second but I limit the screen updates to 10 per second. Still need to work on switching out of this mode as at the moment it does not work and I need to unplug the ELM to clear the mode. But I should have that fixed by the end of the day.

I will update this post with a new screenshot with regeneration when I take the Leaf out for a drive later today.



Here is the end of a short drive back to my house. I am thinking of increasing the time window to 60 seconds (600 samples).