My Nissan Leaf Forum

will need to try this app

SilverLeaf wrote:Just got my 2013 Super mini ELM327 WiFi for iPhone OBD-II OBD Can Code reader and LEAFStat app.

How long did it take to get the ODB-II reader after you ordered it? I ordered mine yesterday (from Jeff-Store) but there is no shipping information, only that I'll get it sometime in June-July, which is bogus info. I plan to get the LEAFStat app as soon as the reader arrives.

I just ordered this wifi OBD adapter that has a power button.

http://www.amazon.com/gp/product/B00IUHDM64/" onclick="window.open(this.href);return false;

Delivery estimate is May 27-30. I'll let you know how it works after it arrives.

Mx5racer wrote:I don't see iit in the App Store
Searching for leafstat

My guess is (like me, at first) you were searching for an iPad app. It's in the store as an iPhone app. You just need to change your view from iPad Only to iPhone Only. The most recent version of the apps store, it's one or the other - you can't look for both in one search.

BrainDonor wrote:

SilverLeaf wrote:Just got my 2013 Super mini ELM327 WiFi for iPhone OBD-II OBD Can Code reader and LEAFStat app.

How long did it take to get the ODB-II reader after you ordered it? I ordered mine yesterday (from Jeff-Store) but there is no shipping information, only that I'll get it sometime in June-July, which is bogus info. I plan to get the LEAFStat app as soon as the reader arrives.

I got mine on eBay direct from China in less than two weeks. Only cost $37.25. Works great.

I just ordered on on ebay from a california seller after a bad experience with Jeff store.

adspguy wrote: After using a telnet program to send an "at sp 6" command to force the protocol, the app seems to be working again. Not quite sure how it was locked into a different protocol, but that got it to work once anyway.

Great that you found it. I've been looking for commands that might change the configuration that doesn't get reset when the adapter is reset. AT SP is one of them. LEAFStat doesn't set it. I'll add that.

rslatkin wrote:I just ordered this wifi OBD adapter that has a power button.
http://www.amazon.com/gp/product/B00IUHDM64/" onclick="window.open(this.href);return false;
Delivery estimate is May 27-30. I'll let you know how it works after it arrives.

This one arrived and I tested it but it's not working. The Status says "Connecting to vehicle..." with a rotating ring, and all the data is shown as dashes. Anything I can do to troubleshoot?

You might try to telnet to the device. The free etelnet app works for me. You would need to set the address and port to the right settings, 192.168.0.10 35000

Try sending
atz
You should see the lights blink and it should print a version message

rslatkin wrote:

rslatkin wrote:I just ordered this wifi OBD adapter that has a power button.
http://www.amazon.com/gp/product/B00IUHDM64/" onclick="window.open(this.href);return false;
Delivery estimate is May 27-30. I'll let you know how it works after it arrives.

This one arrived and I tested it but it's not working. The Status says "Connecting to vehicle..." with a rotating ring, and all the data is shown as dashes. Anything I can do to troubleshoot?

I haven't tested with that particular device. I'll PM to see about collecting more diagnostic info.