Page 25 of 47

Re: iOS LeafSpy Pro Support

Posted: Thu Sep 15, 2016 11:23 am
by Turbo3
bluepassion wrote:i need some advice, so ive downloaded the app on my iphone but it wont pick up the Konnwei OBD any suggestions where im going wrong :?:
iOS only supports Bluetooth 4.x LE OBDII adapters. The Konwei will not work. I recommend the LELink from Amazon.

For a Bluetooth 4.x LE OBDII adapter to be detected by LeafSpy its ID must be "known".

The current "known" devices are:
OBDBLE (LELink)
Viecar
IOS-Vlink
Kiwi
IOS-HHOBD
Carista

Ones that don't work are: (don't support the necessary commands to communicate with a Leaf)
dnt OBD2
Autophix
ios Diagbox

Re: iOS LeafSpy Pro Support

Posted: Thu Sep 15, 2016 11:26 am
by Turbo3
RichSun wrote:Feature request:

On the summary page, you show a live readout of the actual energy consumption as a number: #V x #A = #kW.

It would be nice to also have a live readout of the actual DTE based on the current consumption and your speed rather than from the average mi/kWh. It would allow you to determine at a glance how far you can really continue driving on the highway before you need to stop to charge.

Ideally, it would be nice to have both of these values also in the bar graph so you can quickly see everything at a glance.
You can already select a V x A = kW in the user selectable area on the Summary screen.

The current test release support using calculated efficiency to calculate DTE

Re: iOS LeafSpy Pro Support

Posted: Thu Sep 15, 2016 11:30 am
by Turbo3
masterofreality wrote:Hi,

Need some help please.

I am trying to use v1.3.12 on an iphone 5S (iOS 9.0.2) with a 4.0 Bluetooth adapter but it seems leafspy only wants to search for wifi adapters. I don't see anything in the setup which sets this specifically.

Cheers..
What model Bluetooth OBDII adapter are you using? The broadcast ID must be known by LeafSpy to be used. You can also specify the ID to LeafSpy in a text file if it is not known by LeafSpy. See the list of known ID in a previous post.

Re: iOS LeafSpy Pro Support

Posted: Thu Sep 15, 2016 11:42 am
by Turbo3
Marktm wrote:
Turbo3 wrote: Now that Bluetooth 4.x LE OBDII adapters are available and iOS supports them they are the recommend OBDII adapter, specifically the LELink. Bluetooth 4.x LE does not need the pairing step which allows the iOS version of LeafSpy Pro to automatically connect when the app is run.
I've experienced the "4.x" requirement using the HM-10 bluetooth/arduino module for iphone app communications (rather than the HC-05). What other determinants are there for LeafSpy link up?

I'd like to try a new?? OBDII dongle;
http://rover.ebay.com/rover/1/711-53200 ... SwqfNXmyxa
I have ordered one for testing. The adapter must support the ELM327 AT command set including setting the header response information (AT SH, AT FCSH, AT FCSD).

I have one that looks like this one from Xtool and it does not support the AT command set so can not be used with the Leaf.

Re: iOS LeafSpy Pro Support

Posted: Thu Sep 15, 2016 11:44 am
by Turbo3
EVforRobert wrote:Feature request: split screen ability with Android 7.0 so Waze on one side and LeafSpy Pro on other.

Using Nexus 6p with Nougat and Konnwei Bluetooth

Thanks for a really useful app!
This is the iOS support thread and this is an Android request. However the next Android test release will added support but not tested since I have no Android 7.0 devices.

Re: iOS LeafSpy Pro Support

Posted: Fri Sep 16, 2016 1:05 am
by bluepassion
Turbo3 wrote:
bluepassion wrote:i need some advice, so ive downloaded the app on my iphone but it wont pick up the Konnwei OBD any suggestions where im going wrong :?:
iOS only supports Bluetooth 4.x LE OBDII adapters. The Konwei will not work. I recommend the LELink from Amazon.

For a Bluetooth 4.x LE OBDII adapter to be detected by LeafSpy its ID must be "known".

The current "known" devices are:
OBDBLE (LELink)
Viecar
IOS-Vlink
Kiwi
IOS-HHOBD
Carista

Ones that don't work are: (don't support the necessary commands to communicate with a Leaf)
dnt OBD2
Autophix
ios Diagbox
Thanks for your great advice
is this one right
http://www.ebay.co.uk/itm/Viecar-4-0-OB ... SwstxVbWyH

Re: iOS LeafSpy Pro Support

Posted: Fri Sep 16, 2016 6:50 am
by Marktm
Turbo3 wrote:
Marktm wrote:
I'd like to try a new?? OBDII dongle;
http://rover.ebay.com/rover/1/711-53200 ... SwqfNXmyxa
I have ordered one for testing. The adapter must support the ELM327 AT command set including setting the header response information (AT SH, AT FCSH, AT FCSD).

I have one that looks like this one from Xtool and it does not support the AT command set so can not be used with the Leaf.
Thanks - let us know your results. Asking for such (AT commands) information from the (Chinese) suppliers is usually at best very confusing! :cry:

Re: iOS LeafSpy Pro Support

Posted: Fri Sep 16, 2016 9:13 am
by Turbo3
bluepassion wrote:
Turbo3 wrote:
bluepassion wrote:i need some advice, so ive downloaded the app on my iphone but it wont pick up the Konnwei OBD any suggestions where im going wrong :?:
iOS only supports Bluetooth 4.x LE OBDII adapters. The Konwei will not work. I recommend the LELink from Amazon.

For a Bluetooth 4.x LE OBDII adapter to be detected by LeafSpy its ID must be "known".

The current "known" devices are:
OBDBLE (LELink)
Viecar
IOS-Vlink
Kiwi
IOS-HHOBD
Carista

Ones that don't work are: (don't support the necessary commands to communicate with a Leaf)
dnt OBD2
Autophix
ios Diagbox
Thanks for your great advice
is this one right
http://www.ebay.co.uk/itm/Viecar-4-0-OB ... SwstxVbWyH
Yes, that looks the same as the one I tested.

Re: iOS LeafSpy Pro Support

Posted: Fri Sep 16, 2016 1:02 pm
by olvia2
I was wondering if there was any way to view total miles driven? Right now that's not an option but I was wondering if there was something that I could do for the app to allow me to access that information.

Re: iOS LeafSpy Pro Support

Posted: Fri Sep 16, 2016 4:16 pm
by Turbo3
olvia2 wrote:I was wondering if there was any way to view total miles driven? Right now that's not an option but I was wondering if there was something that I could do for the app to allow me to access that information.
What do you mean by "total miles driven"? Driven lifetime (odometer) is on the top of the first screen. Driven per trip is selectable on screen 4.