boba
Well-known member
I've spent a lot of time looking up information and using it to set up Leaf Spy with no success.
It is at the point now of showing all three of the (Lite) pages but two have no information and
the cell voltage page looks good but on inspection all voltages but 2 are the same at 4 volts.
Soc = 0.0. I'd very much appreciate it if someone would look at the following information and
make suggestions of how to get it to work.
Background:
Scanner = BAFX Products - Bluetooth OBD2 scan tool from Amazon.
2015 Leaf (S)
Nexis7 Tablet
Password set to 1234 (tried 0000)
Port set to 1 (tried 16)
Procedure:
1. Car on with scan tool plugged in.
2. Nexis7 on and set to settings section
Bluetooth on --> "Paired OBDII"/"Available devices OBDII"/"Nexis7 is visible to nearby devices while
bluetooth setting is open."
3. Leaf Spy on. Touch Settings. Select OBDII and choose WIFI then network BA5DA2. Choose 1234 PW
The lower right yellow rectangle flashes on WIFI NC and then settles on CNNT2 SSID but never
turns green or has the word "connected".
4. Tapping and or swiping the screen shows all 3 Lite screens but no real data.
It is at the point now of showing all three of the (Lite) pages but two have no information and
the cell voltage page looks good but on inspection all voltages but 2 are the same at 4 volts.
Soc = 0.0. I'd very much appreciate it if someone would look at the following information and
make suggestions of how to get it to work.
Background:
Scanner = BAFX Products - Bluetooth OBD2 scan tool from Amazon.
2015 Leaf (S)
Nexis7 Tablet
Password set to 1234 (tried 0000)
Port set to 1 (tried 16)
Procedure:
1. Car on with scan tool plugged in.
2. Nexis7 on and set to settings section
Bluetooth on --> "Paired OBDII"/"Available devices OBDII"/"Nexis7 is visible to nearby devices while
bluetooth setting is open."
3. Leaf Spy on. Touch Settings. Select OBDII and choose WIFI then network BA5DA2. Choose 1234 PW
The lower right yellow rectangle flashes on WIFI NC and then settles on CNNT2 SSID but never
turns green or has the word "connected".
4. Tapping and or swiping the screen shows all 3 Lite screens but no real data.