and so on...5D C0 28 64 C2 10 1F FF
5D C0 F0 64 C3 11 03 DE
5D C0 28 64 C2 10 A1 86
5D C0 F0 64 C3 11 66 72
5D C0 28 64 C2 11 03 DE
Code: Select all
can1 5BC  5D C0 F0 64 C3 11 00 3C can1 5BC  59 80 F0 64 C3 01 60 5A can1 5BC  5D C0 F0 64 C3 12 5F FF can1 5BC  59 80 F0 64 C3 02 BF FF can1 5BC  5D C0 F0 64 C2 13 1F FF can1 5BC  59 80 F0 64 C2 00 1F FF can1 5BC  5D C0 F0 64 C2 10 A0 28 can1 5BC  59 80 F0 64 C2 01 00 3C can1 5BC  5D C0 F0 64 C2 11 60 5A
To do that with a Consult 3+ you need a special security card to do the programming.nealm wrote:Hi,
I would like to program a new key fob as we lost one of ours. Does anyone know how to do that using an OBD interface ?
The "stealer" -ship wants $200 just to program a new FOB. I would love to do this myself but have no clue how. I do have my existing pin code for the one fob I have.
This question is very close to mine. I am working on a CAN Bus shield for an Arduino shield I purchased from EVTV. My project is a V2H interface to my Nissan Leaf. I am just starting out so I apologize for my ignorance, but working with the Users Manual and programming the CAN interfaces I need to set up the CAN_FRAME Data Type Structure. Here i set the Frame size and structure.sandeen wrote:Is there any existing library out there to do basic LEAF canbus/evbus decoding over bluetooth? I'd really like to teach OpenEVSE to be able to monitor state of charge for example (by using an ESP32 in place of the ESP8266 it currently uses, to get the built in bluetooth support...)