evnow
Well-known member
Assuming we standardize on a 16x2 large format LCD, what do you wan to see displayed ?
In the first line I think we should have
- SOC # (3+1 chars)
- SOC % (4+1 chars)
- 9 chars left
Second line
- anything we want, including scrolling stuff, if we need more than 16 chars
Ideas I have now are
- Range left @ different speeds (like my WinPhone7 app shows, based on Tony's chart)
- Rate of consumption of charge and based on that # of minutes of driving left
ps : I should add - with the AVR-CAN we are using, we can only pull data from one CAN bus - and in our case EV-CAN since we want SOC. Anything in the EV-CAN can be shown (as long as it has been identified).
In the first line I think we should have
- SOC # (3+1 chars)
- SOC % (4+1 chars)
- 9 chars left
Second line
- anything we want, including scrolling stuff, if we need more than 16 chars
Ideas I have now are
- Range left @ different speeds (like my WinPhone7 app shows, based on Tony's chart)
- Rate of consumption of charge and based on that # of minutes of driving left
ps : I should add - with the AVR-CAN we are using, we can only pull data from one CAN bus - and in our case EV-CAN since we want SOC. Anything in the EV-CAN can be shown (as long as it has been identified).