Glyndwr1998 wrote:Hi all,
I have just purchased a Leaf Gen1 battery from a salvage yard.
I had previously purchased a Gen2 pack, and after reading ticktock posts leaf canbus with microcontroller, I made up a obd lead to attach to the battery box round socket a 12v supply, neg, canH and canL signals. for the use of a elm bluetooth adaptor and tablet or phone,
What soft do you use/planning to use to read directly from the battery via EV-CAN ? Please advise.
There is a 2013 pack from the wreck sitting for a while - I am keen to go and check it out using your methodology.
From my experience:
LeafSpyPro only reads main CAN and not EV-CAN. Battery reports it's status to VCM via EV-CAN.
I've noticed that in 2010 Service Manual two pins at the battery plug are located differently from the 2014 service manual.