I have an air conditioning compressor from the Nissan Leaf. I 'm trying to understand the protocol between the compressor and A/C amp.
Model of compressor 92600-1MG0B
The compressor pins are next, what I managed to disassemble and find out which ones are needed and which ones are not.
-- 12v (Operational nutrition)
-- TG (Grounding)
-- OFF (not used)
-- OLP (not used)
-- SI (Suspected LIN or UART (TX))
-- SO (Suspected LIN or UART (RX))
Can it work with 12V as an operational meal or do you have to serve 400V?