Page 9 of 10

Re: SOC Gauge update

Posted: Sat Jul 09, 2011 2:29 am
by tzzhc4
Count me in i would buy one.

Re: SOC Gauge update

Posted: Sat Jul 09, 2011 1:41 pm
by jimtubbs
Count me in for the soc Jim Tubbs

Re: SOC Gauge update

Posted: Sat Jul 09, 2011 1:46 pm
by TomT
I'm already in for one.

Re: SOC Gauge update

Posted: Sat Jul 09, 2011 3:04 pm
by gasmiser1
Count me in, if under $200 :mrgreen:

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 6:53 pm
by fiestatrio
I'm in

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 7:17 pm
by TangoKilo
+1 8-)

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 7:17 pm
by evnow
Are you guys saying "I'm in" for Gary's offering or Turbo's ?

I beleive Turbo is no longer planning to offer this ...

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 7:45 pm
by garygid
Currently, I am thinking a Kit of all the needed parts would be ABOUT $150 or so, plus shipping (and tax in CA, I assume).

I MIGHT build some for ABOUT $250 (plus S and T), but I am not sure how my stamina will hold out. The "fussy" part is getting the slot for the Display just right. The wiring is not bad, and some parts are even optional. Required are 12 solder connections, with another 9 optional (on two toggle switches).

BUT, it IS possible to do things wrong, and "blow" some of these parts, the circuit board or the Display, or even your car! Try this ENTIRELY at your OWN RISK.

Maybe somebody in your area will build the SOC-Meter for you.

As we discover more things to display, the SOC-Meter, with upgraded software, will be able to show more than just SOC. Right now, my version 1.05 shows "SOC Percentage" (of 281 raw), and the "Raw SOC".

IMPORTANT NOTE: We do NOT know that this "SOC" number observed on the EV-CAN buss is actually useful for any specific purpose, and it MIGHT not be SOC at all!

Note: The same device, with the addition of an RS232 connection to a PC (RS232-to-USB for most folks), can be used for one-channel CAN-Capture.

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 9:43 pm
by planet4ever
My circuit board soldering days are over - due to hand tremors I can't even sign my name legibly half the time these days. I definitely want an SOC gauge, but a kit is out of the question.

Ray

Re: SOC Gauge update

Posted: Sun Jul 10, 2011 11:41 pm
by LEAFfan
I'm just going to wait until the ScanGauge II people have one to sell or can upgrade my 'cng' one.