I am fitting 32 battery modules that are each configured 3S4P and use 60ah pouches, so 284 pouches in total.
Each module has two thermistors, so 64 of the damn things!
Does anyone know of anyone who has figured out how to build a standalone temperature monitoring system with in built high and low alarms, so if thermistor goes out of spec, I can look at LeafSpy voltages to hopefully see from the voltages which pouch may be having problems.
It would be great if the temperatures could display on LeafSpy in much the same way as the cell voltages do, but that is surely above everybody’s pay grade!!