This thread is for discussing the use and features of my CAN-Do program.
Annoying Features Reported
1. With no Log loaded, "All Messages" (on Filters page) malfunctions.
2. Windows (like the Plot window) do not stay where you move them.
3. Make Slower/Faster work better before/during Dashboard "playback".
Significant Bugs Reported
LEAFs CAN messages might occur on any of the LEAF's three major CAN buses: EV, Car, and AV. There is also a QC CAN bus, but it is not available at the LEAF's On Board Diagnostics (OBD) connector.
For example, a message-ID that appears to contain the "SOC" occurs on the EV-CAN bus about every 6 seconds while charging.
I have posted one 6-million EV-CAN-message example ".evc" file (a 6-hour charging session).
I have also posted a ".csv" file with a "recipe" for each of the various "decoded" values that have come to my attention.
These files can be read by my evolving "CAN-Do" program (also posted, for WinXP, Vista, and Win7). With these files you can use the program to look for yet "undiscovered" meanings in the 8 bytes of data that are part of each (most) messages.
" onclick="window.open(this.href);return false;
to download copies of these files if you want to "play" in this game, without any hardware or expense. No, no User Manual yet.
CAN-Do can capture data from 1 to 3 CAN buses, write (and read) CAN-log files, help with analysis of the message data, do data graphing, and even display a time-lapse or real-time "dashboard" with some of the "discovered" values.