Interesting... Would you happen to know if they replaced the stock hub bolt with longer ones? The stock ones don't look like they are long enough to allow using an 1" spacer.llaumann said:The body shop put 1" spacers in the rear.
Interesting... Would you happen to know if they replaced the stock hub bolt with longer ones? The stock ones don't look like they are long enough to allow using an 1" spacer.llaumann said:The body shop put 1" spacers in the rear.
Bringing a bit of Mira Mesa "fresh" to my moldy corner of La Jolla.Drivesolo said:Looks good! Slightly tuner-esqe, or as much as a Leaf can be.
The transition from Mid Engine Rear Traction (MR) to Front Engine Front Traction (FF) is quite a change - but FF is probably safer for me in the long run. I spun out on wet streets a few times in the MR2.Drivesolo said:Was going from a MR to an FF was an easy transition for you? Going FR to FF for a daily driver was (and still is) a bit rough for me.
Thanks for the suggestion TRONZ, I will get the front spacers next and have the rear bumper protected on your suggestion. The TEIN coilovers are making a bit of a slight squeak on the right side only and I will have them take a look at that too.TRONZ said:Sorta looks like you could up the spacer in the front by 3/8 or 1/2 inch. Let us know if you get any frosting of the bumper paint behind the rear wheel. Might want to have some protective film added before the paint chips start showing up there. She's too pretty for that hassle.
Lynn, now that you've had your new setup for a while, how do you like the Tein dampers?llaumann said:Tein "Street Basis" dampers bought on Nengun.com
TRONZ said:Very well done! Thank you for posting up the pics. I was a little freaked out when you said +48 offset all around cuz there is no way you could get a 7.5 rim that flush in the rear with that spec. Now the 1" spacer makes a lot of sense. You are running an effective offset of +23mm in the rear. Food for thought in the low offset, concave spoke camp. Congratulations the ride is looking sharp!
eHelmholtz said:Lynn, now that you've had your new setup for a while, how do you like the Tein dampers?llaumann said:Tein "Street Basis" dampers bought on Nengun.com
Lynn, Thanks for the update and thanks in particular for letting me test drive your car - your mods have really changed the car for the better! Also, if you're interested in adding leather, here is the information; you can also add new paneling like wood or aluminum easily (Use code forum or forums to get 10% off). Side moldings can also be added, here. I particularly like the side turn signal upgrade.llaumann said:The Tein Street Basis dampers still feel a little bit rough on the bumps. We have a lot of erosion problems around La Jolla and there are many potholes and uneven spots in the road, so there are times when I curse the new setup as we get jarred around a bit. However all that is forgotten in those La Jolla Gran Prix moments, making all the green lights and taking the corners at top speed in a narrow lane. There are compound handling characteristics between the suspension, wheels, and tires, and I am certainly no expert on which component does what, and by how much.
The dampers certainly lower the stance in general and improve the appearance greatly. I believe they give it a firmer feel when accelerating, braking and when in the turns, and you can really feel the road when its rough.
TRONZ said:Sorta looks like you could up the spacer in the front by 3/8 or 1/2 inch. Let us know if you get any frosting of the bumper paint behind the rear wheel. Might want to have some protective film added before the paint chips start showing up there. She's too pretty for that hassle.
llaumann said:Thanks for the compliments, I appreciate that. Here are the audio specs:
JL AUDIO XD300/1: Monoblock Class D Subwoofer Amplifier, 300 W - $279
JL AUDIO CP108LG-W3v3: Single 8W3v3 MicroSub, Ported - $249
Enter your email address to join: