SAE J1772 inlet port Dimensions

[borland]

No. I don't want anyone putting graffiti on my graffiti art. Nothing very complicated here that you can't duplicate very quickly. Besides, the Autodesk's 123D Design free software has some bugs that create problems modifying existing drawings, so it's best to start with basic shapes when learning to use the program.

The biggest problem is with printing. The hobby/open source 3D printers require calibration and settings that most operators don't fully understand.

[MikeD]

Sorry to be somewhat off topic, but has anyone measured the diameter of the charging cable on the 2013 level 1 EVSE? Is it still ~11.5 mm as was the previous years, or is it thinner?

[jclemens]

I can't believe you guys missed this.
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!

[UBUYGAS]

Check out my Install and review pictures here: http://www.mynissanleaf.com/viewtopic.php?f=37&t=15077" onclick="window.open(this.href);return false;



Thanks Joel for posting your link below! I just bought one of these:



You don't happen to have WHITE PLA?


http://erroneus.myevblog.com/buy-plastic-parts-here/" onclick="window.open(this.href);return false;

I can't believe you guys missed this.
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!

[jclemens]

Sorry, no white, Once I use up the dark blue PLA, I will get white next time. You are not the first to request it.
The dark blue was a mistake as I was trying to order glow-in-the-dark blue.
I will be sending you grey and you'll get an email as soon as it goes out.

[UBUYGAS]

Thanks!

Can I spray paint the unit?

Sorry, no white, Once I use up the dark blue PLA, I will get white next time. You are not the first to request it.
The dark blue was a mistake as I was trying to order glow-in-the-dark blue.
I will be sending you grey and you'll get an email as soon as it goes out.

[jclemens]

I have painted PLA in the past, but with a brush, not sure how it would take a spray, it might work.
I'd suggest masking the input area as to not get paint flakes in your charge plug.

[GlennD]

I can't believe you guys missed this.
I had this done, printed and uploaded a month before this thread was even created

http://www.thingiverse.com/thing:53586

who in the world has a 3d printer at home and has not heard of the thingiverse?!

I just printed this out. The latch feature is an improvement.

Thanks for the link.