I ran fire alarm cable from home depot since it's a 4 wire + shield. I'm going to show my list from B18 > B3:lipcius wrote:I have connected the OEM camera according to all instructions in this thread, however I get only black screen with parking lines. I saw couple of 2013 SV owners had the same and some gave up with OEM camera. Can please someone confirm to make this work with OEM camera?Weisea wrote:My 2013 SV did not have wires from the C pillar to the kickpanel so I added my own video cable and wires.lipcius wrote:I have read through all the thread, however people who installed an OEM camera on 2013 SV model - can you confirm that all SV models miss the wire from C pillar to drivers side kickpanel?
Thanks for your answers.
1. V+ 13 > 6
2. V- 12 > 5
3. Sig 18 > 4
4. Shield 17 > 3
5. Signifier ground 11 > 22
I cajoled sumitomo to send me a "sample" of male terminal ends since there isn't enough in the old hatch harnesses for it to work.
Hope it works. I also have notes showing 57 V+, 58 V-, 59 sig, 60 Shield, 56 signifier ground. I'm not sure if that's what's on the connector case?