Thanks.SurfHawk wrote:Awesome write up. Any details on Cherry switch and housing? Part number, what kind ( single throw?) And what pin to solder to on Cherry switch?
-Mini Micro Switch microswitch 3 Pins 5A-125VAC 3A-250VAC NO NC A511
- Dimension: Length: 20mm Width: 10mm Height: 6.5mm
Solder the wires to pin COM and NO. NO stands for normally open. COM stands for Common Terminal.
The switch housing (18mm wide) is made from a roof sheet metal. For those who are familiar with sheet metal, bending them should be easy. Then punch or drill two varying size holes on them. One side is (EDIT 9/32") hole and the other is 3/16 hole. I have an arbor press which is set up for this purpose. I'm not aware of a place to get this item other than to show people how make them or get it from me. I can send the housing for $3 to cover shipping.