Fri Oct 12, 2018 1:05 pm
I just installed received and installed Version 9.0. I have not tried any new features yet.
To Gary and Gene: I had previously reported that my Cat6 cable in my new sealed wall could not pass signal although it passed continuity tests on all 8 pins. After replacing connectors on both ends, I now have this Cat6 cable running at 100BaseT level. It will not run at 1000BaseT, but it connects to my solar inverter that only has a 100BaseT port, so 100 is perfectly acceptable. The cable run is about 30', A much longer run, about 65', runs fine at 1000BaseT in the attic. In the future, this experience suggests running Cat6 cable through a wall is tricky, and should be tested before closing the wall. It also suggests it is risky to reuse a Cat6 connector.
LEAF Ocean Blue SL, "100 % Electric" decals, Delivered June 3, 2011
Sold June 2014 27K miles, 18% capacity loss, 1 bar, 5.0 mi/kWh.
Solar 4.6 KW DC with both string and micro-inverters.