Rodriguez
Forum Supporter
Posts: 24
Joined: Tue Nov 26, 2019 3:46 am
Delivery Date: 26 Nov 2019

How to open the charging flap by hand

Fri Jan 03, 2020 2:08 pm

A few months ago my charging flap wouldn't open anymore and I couldn't find a decent to the point video on how to do it manually, so I made one myself. This is meant someone who encounters the same problem and just wants to plug in, so I kept it very brief.

Thought might post it here as well, you might want to know the trick before you need it:

https://youtu.be/0J9lPGGp3-A

jjeff
Posts: 2153
Joined: Wed Jan 13, 2016 9:10 am
Delivery Date: 13 Jul 2014
Leaf Number: 422121
Location: MSP MN

Re: How to open the charging flap by hand

Fri Jan 03, 2020 2:53 pm

Thanks, seems easy enough.
The only time my hatch wouldn't open was after rain/ice. I assume the rubber seal got water on it and froze, freezing the hatch to the rubber. Pushing the button didn't help, the spring wasn't strong enough to break the ice seal. I tried pounding down on the hatch with the heal of my hand but nothing, in the end I ended up slipping my fingers as much as possible in the crack and while lifting I used the remote hatch release(only found on '13 and later Leafs. If it had happened to my '12 it would have taken a second person, one to pry up on the hatch and one to pull the remote hatch release below the steering wheel. As I was alone I was glad it happened to my '13 :)
Using the trick you posted even with a '12(or '11) it should be a one-man job.
2012 SL purchased used 2/'16
2013 S w/QC purchased new
Juicebox Premium 60a L1/L2 EVSE, Ebusbar 16a L1/L2 EVSE
'12 EVSEupgrade'd 20a L1/L2 EVSE, '13 EVSEupgrade'd adjustable 6-20a L2, 6-13a L1 EVSE
Zencar 13, 20, 30a L1/L2 portable EVSE
GE Durastation 30a

Rodriguez
Forum Supporter
Posts: 24
Joined: Tue Nov 26, 2019 3:46 am
Delivery Date: 26 Nov 2019

Re: How to open the charging flap by hand

Fri Jan 03, 2020 6:48 pm

Some vaseline or silicone spray on the rubber should help prevent that from happening, people have been putting that on door rubbers to prevent them from freezing shut since whenever while fiercely debating which one is the better choice.

Anyway next time you have some spare time, give it a try, it's not that hard but it can be a bit finicky to locate the lever the first time, might as well take your time to find it out while it's nice and sunny instead while you're stuck in a parking lot in the freezing rain :lol:

LeftieBiker
Moderator
Posts: 15509
Joined: Wed May 22, 2013 3:17 am
Delivery Date: 30 Apr 2018
Location: Upstate New York, US

Re: How to open the charging flap by hand

Fri Jan 03, 2020 7:49 pm

Petroleum jelly will slowly dissolve rubber, so I'd go with either silicone spray or silicone rubber-friendly grease.
Scarlet Ember 2018 Leaf SL W/ Pro Pilot
2009 Vectrix VX-1 W/18 Leaf modules, & 3 EZIP E-bicycles.
BAFX OBDII Dongle
PLEASE don't PM me with Leaf questions. Just post in the topic that seems most appropriate.

Oilpan4
Posts: 1731
Joined: Wed Jan 09, 2019 10:51 pm
Delivery Date: 10 May 2018
Leaf Number: 004270

Re: How to open the charging flap by hand

Fri Jan 03, 2020 9:11 pm

I was thinking about sticking some electric hand warmers under there along the seal.
For my car it likes to collect water near the lower part of the door seal.

That's good to know incase the cable freezes or breaks.
"THE ABOVE POST CONTAINS MISLEADING AND INACCURATE INFORMATION. PLEASE CONSIDER IT OPINION, NOT FACT". -someone who I offended and is unable to produce the facts in question.

User avatar
Nubo
Posts: 5779
Joined: Fri May 28, 2010 11:01 am
Delivery Date: 31 Oct 2014
Location: Vallejo, CA

Re: How to open the charging flap by hand

Fri Jan 03, 2020 10:55 pm

LeftieBiker wrote:
Fri Jan 03, 2020 7:49 pm
Petroleum jelly will slowly dissolve rubber, so I'd go with either silicone spray or silicone rubber-friendly grease.
Agreed; I avoid using petroleum products on rubber. It depends on the specific material but it's a good rule. Definitely better safe than sorry.
I noticed you're still working with polymers.

LeftieBiker
Moderator
Posts: 15509
Joined: Wed May 22, 2013 3:17 am
Delivery Date: 30 Apr 2018
Location: Upstate New York, US

Re: How to open the charging flap by hand

Fri Jan 03, 2020 11:24 pm

I think that maybe synthetic rubber will better resist petroleum products, but since so many rubber products are still made from or with natural rubber that it's not worth the gamble, as you said.
Scarlet Ember 2018 Leaf SL W/ Pro Pilot
2009 Vectrix VX-1 W/18 Leaf modules, & 3 EZIP E-bicycles.
BAFX OBDII Dongle
PLEASE don't PM me with Leaf questions. Just post in the topic that seems most appropriate.

goldbrick
Posts: 965
Joined: Tue Aug 01, 2017 3:33 pm
Delivery Date: 01 Aug 2017
Leaf Number: 311806
Location: Boulder, CO

Re: How to open the charging flap by hand

Sat Jan 04, 2020 9:34 pm

Thanks OP, for the great write-up. I hope to never need to know this but if for some reason I can't open my charging door, I will know what to do.

powersurge
Posts: 1743
Joined: Wed Oct 21, 2015 10:24 am
Delivery Date: 06 Dec 2014
Location: Long Island, NY

Re: How to open the charging flap by hand

Sun Jan 05, 2020 6:02 am

I have found that it is not the rubber parts that need to be lubricated, but the cables. I have found that since we do not pop the hood very often, the door cable may rust or stick, and the door will not open,

A little bit of wd40 and or penetrating oil will get it to open freely, and maybe some lithium great will keep it well lubed...

PS - WHAT DOES THE GREEN DOT NEXT TO MY NAME MEAN? (capitals used for greater visibility)

GerryAZ
Gold Member
Posts: 2599
Joined: Mon Nov 22, 2010 6:47 pm
Delivery Date: 12 Jun 2011
Location: Phoenix, AZ

Re: How to open the charging flap by hand

Sun Jan 05, 2020 6:29 am

The green dot means you are online on the forum.

Lubricating the mechanical cable is a good recommendation--easiest way is with a pressure lubricator that clamps to one end of the cable. You can get one at a motorcycle accessory shop along with lubricant in a spray can. WD40 is OK, but motorcycle cable lubricant will last longer between applications.

I am glad to see from the original post that it is not difficult to access the electric release mechanism used starting in 2013.
Gerry
Silver LEAF 2011 SL rear ended (totaled) by in-attentive driver 1/4/2015 at 50,422 miles
Silver LEAF 2015 SL purchased 2/7/2015; traded 8/10/2019 at 82,436 miles
White LEAF 2019 SL Plus purchased 8/10/2019

Return to “Tips & Tricks”