Protocol of interaction between air conditioner compressor and A/C amp.

I have an air conditioning compressor from the Nissan Leaf. I 'm trying to understand the protocol between the compressor and A/C amp.
Model of compressor 92600-1MG0B
The compressor pins are next, what I managed to disassemble and find out which ones are needed and which ones are not.
-- 12v (Operational nutrition)
-- TG (Grounding)
-- OFF (not used)
-- OLP (not used)
-- SI (Suspected LIN or UART (TX))
-- SO (Suspected LIN or UART (RX))

Can it work with 12V as an operational meal or do you have to serve 400V?
Images

Not sure what you mean about "operational meal", but the power to actually turn the compressor is from the High Voltage system.

A translation of "Power Feed" can give terms like power "meal or nutrition".

Kinda like the Chinese word for battery, is the same word as "electricity pond"

So the OP was wanting to know what voltage could power up the compressor.